1833051 Members
2501 Online
110049 Solutions
New Discussion

SureStore SC10

 
SOLVED
Go to solution
Nobody's Hero
Valued Contributor

SureStore SC10

I am about to venture into supporting an N4000 with a SC10 disk storage attached. My question is, with the SC10, do you manage this using sam and normal command line commands? Or is there seperate software like the VA7100 to control the disks?
UNIX IS GOOD
3 REPLIES 3
Pete Randall
Outstanding Contributor
Solution

Re: SureStore SC10

Robert,

Unless configured with the FC60 controller, an SC10 is JBOD: there are no utilities, no special commands, just plain old disk.


Pete

Pete
Uday_S_Ankolekar
Honored Contributor

Re: SureStore SC10

SC10 disk storage can be managed by normal unix commands and/or SA

-USA..
Good Luck..
Helen French
Honored Contributor

Re: SureStore SC10

SC10 will be just a disk enclosure which has seperate disks. If it's connected with fc60 or Raid 4Si controller card, then you can create disk array LUNs on the disks. But if not, it can be treated as disks and you can manage it with either SAM or command line.
Life is a promise, fulfill it!