The disk drive returned a status of CHECK_CONDITION, RECOVERED_ERROR.

[kuldeep pandita]

can any body help me to find out what the problem is when i get the following error as cron message on my system on which the HP storage works virtual array 7400 is configured(sdm)

event description :The disk drive returned a status of CHECK_CONDITION, RECOVERED_ERROR.
severity 2.

What does Severity 2 indicate......critical,ignore or else?

[Eugeny Brychkov · Accepted solution]

This should be informational event, although if you see a lot of these events for this disk in short time frame then check disk stats with 'armlog -d M/D1 VA7400' (for example).
This is recovered error, and usually your action is not needed. If VA will decide that disk has exceeded its 'problem limit' then VA will fail disk and you'll need to replace it
Eugeny

[kuldeep pandita]

Thanks very Much......Ya finally the disk failed we replaced the disk....