HPE Community
Disk
1830018 Members
2120 Online
109998 Solutions
New Discussion

Upgrading "split bus" SC10.

 
SOLVED
Go to solution
Geoff Brown
Frequent Advisor

‎06-19-2007 05:45 AM

‎06-19-2007 05:45 AM

Upgrading "split bus" SC10.

We have two separate servers connected to a "split bus" SC10, each connected to 5x disks.
Can anyone tell me if it is ok to shut down one server (the SC10 still powered on), & swap the 5x SC10 disks on that server?
The other server would still be accessing the 5 disks in the other half of the SC10. Is it possible that the running server would be interupted (even if the SC10 is configured "split bus")?
Thanks
Geoff
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎06-19-2007 05:51 AM

‎06-19-2007 05:51 AM

Solution

Re: Upgrading "split bus" SC10.

Because of the spli bus, this should work fine.

Be aware that the disks are split into odd and even slots.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Geoff Brown
Frequent Advisor

‎06-24-2007 07:27 PM

‎06-24-2007 07:27 PM

Re: Upgrading "split bus" SC10.

Torsten,
Thank's for the advice.
Regards,
Geoff.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.