hpe sr416i-a gen10+ latency check

[otkachuk_playti]

Hi guys ,
I want to check latency for NVME drives, which are connected through the raid controller  sr416i-a gen10+ .  I tried to use arcconf, ssacli ,  but I don't have any information regarding latensy . What utility can be used to check this?

[Greeshma21 · Accepted solution]

Hi @otkachuk_playti ,

You can use the Smart Storage Administrator (SSA) or its command-line interface, ssacli.
To check latency, you can use the command ssacli controller slot=X drive all show (where X is the controller slot number) to display information about all drives connected to the controller.

For more info, please refer to this.
HPE SSA GUI: https://support.hpe.com/hpesc/public/docDisplay?docId=dp00002639en_us&docLocale=en_US
HPE SSA CLI: http://support.hpe.com/hpesc/public/docDisplay?docId=dp00002635en_us&docLocale=en_US

Regards,
Greeshma

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".