RX5670 using ClariionX600 questions

[Edward J. Duranty_2]

Hi All,

I have an rx5670 running hp-ux 11.23 that was recently attached to a Dell/EMC clariion x600 solution. It was configured using Dell/EMC Navisphere Management Suite software and has a lun size of 256000Mb of available space using raid5.

Here is the dilemma; I am unable to configure the space using SAM (with and without LVM support). Is this a limitation using SAM, or with the configuration that we have?

Current hardware/software installed for this setup:
1) We have installed two A6795A fibre adapters in slots 10 and 11 on the rx5670.
a) fcmsutil output for the cards â
V I T A L P R O D U C T D A T A
--------- ------------- -------
Product Description :'A6795A 2Gbps/1Gbps Fibre Channel 4X PCI HBA'
Part number :'A6795-62001'
Engineering Date Code :'B-4322'
Part Serial number :'A56A00143013'
Misc. Information :'PW=15W'
Mfd. Date :'A-4350'
Check Sum : 0x61
EFI version : '001.10'
Asset Tag :'NA'
b) Tachlite device file properties-
crw-rw-rw- 1 bin bin 75 0x000000 Mar 22 14:13 /dev/td0
crw-rw-rw- 1 bin bin 75 0x010000 Mar 22 14:13 /dev/td1
2) Ioscan â f and tdlist commands show all devices claimed.
3) Navisphere client agent software up and running.
4) Navisphere server is running on Windows platform and can see HP-UX host rx5670.

Th

[Uwe Zessin]

Could be a limitation of SAM, yes. Last time I checked LUNs from an EVA (Enterprise Virtual Array - that was handed over to HP by Compaq ;-) could not be managed by SAM either.