3PAR 3.3.2.159 (MU1)+P04 Upgrade - Anyone else seeing node errors?

[MikeM3]

Did the upgrade to 3.3.2.159 (MU1)+P04, and saw this known issue during the process on node 3:

https://support.hpe.com/hpesc/public/docDisplay?docId=a00128867en_us&docLocale=en_US

However, as of about a week ago (several weeks post-upgrade), suddenly started getting this alert every few hours:

The check for valid files on the internal drive of Node 3 found the following invalid files: /var/opt/tpd/gnupg/trustdb.gpg /var/opt/tpd/gnupg/pubring.gpg.

Only happens on node 3, and no other files have been reported as corrupt since the upgrade. Suspect it is related, but wanted to see if anyone else is seeing this. Or, perhaps somehow I have a single node OS drive that happens to have a bad sector on the exact files that were noted in the upgrade check...?

Also, if there isn't a fix in the OS, has anyone had any luck doing a noderescue to correct this? Or is there a better way...?

[support_s]

System recommended content:

1. HPE 3PAR OS 3.3.2 MU1 Patch 04 Release Notes | Purpose

2. HPE 3PAR OS 3.3.1 GA/EGA/MU1/EMU1/MU2/MU3 Release Notes

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Cali]

Hi Mike,

this is a known "Issue" that is (hopefully) fixed in one of the Next Updates.

Document - Advisory: HPE 3PAR StoreServ Storage, HPE Alletra 9000, and HPE Primera 600 Storage - Operating System Upgrade May Report Invalid Checksum Validation | HPE Support

If you like to suppress these Notification Mails, if have just written a small Guide here:

How to suppress 3PAR notification (itrunde.de)

I have applied this to several 3PAR Systems.

Cali

[veeyarvi]

Hi Mike,

The known issue is fixed with the 3.3.2 version (what currently installed) and ukit 052. If array also has 052 installed (showversion -b -a will list the version of 'Upgrade Tool'), this needs further investigation.

Could you confirm the UKIT version installed?

Regards, 

Veeyaarvi