3par fault disk replacement

[tnvjdbwj]

3par disc replacement

I have a question.
2disk fault at 3par7400.
By the way, how do I check that the spare chunklet has been replaced in storage?

If it goes to spare chunklet, is it possible to replace 2 disks at the same time?

Thanks 

[log]

06:10 KST Media error fix on pd 22 ch 2423 failed-Move pd 22 ch 2423 to spare failed: move_error_disk_relocating 2:12 KST Marking slow disk 68 falled

7:14 KST Magazine 12:0. Physical Disk 2 Failed (Replace Drive, Vacated, Invalid Media, Smart Threshold Exceeded) 1:27 KST Magazine 1:15:0. Physical Disk 13 Failed (Replace Drive, Vacated, Invalid Media, Smart Threshold Exceeded)

[sbhat09]

Hello @tnvjdbwj,

During the drive failures, failed chunklets will be replaced by spare chunklets instantly. Generally, there will not be any issues. Otherwise, you will see lot of 'degraded' errors.
To confirm that, take a look at 'showld' command output in cli. If the 'detailed state' is showing normal, the spare chunklets have replaced the failed ones and the LDs are fine now.

Please let me know if you need more details/clarifications.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.