Decommission VM from 3PAR

[lakshmsingh]

Hello Experts,

Please advise if the following steps holds good for decommissioning a VM from 3PAR.

1. Identify the Volume and Host

Check which volumes are mapped to the server (host):

2. Unexport the Volume from the Host

To remove a specific volume from the server:

3. Unexport All Volumes from a Host (If Required)

If you want to unmap all volumes from a specific server

4. Remove the Host (Optional)

If the server will no longer use storage from 3PAR

5.  Verify the Unmapping

[AnilKT]

Hi lakshmsingh,

The procedure that you have mentioned is correct.

Before you proceed to decommission, I would recommend you take the backup of your data (to be on the safer side).

Hope this helps.!

Regards

Anil

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".