HDD Part number

[rakesh2]

Hi,

In HP 3PAR  storeserv 8000 4n, how to take Hard disk part number without removing it. 

Any command is there to check the Hard disk part number.

[Dennis Handly]

Have you looked at "showpd -i"?

[rakesh2]

if i give showpd -i 

ST3PA101 cli% showpd -i
Id CagePos State ----Node_WWN---- --MFR-- -----Model------ -Serial- -FW_Rev- Protocol MediaType
0 0:0:0 normal 5000CCA0295CB114 HITACHI HVIPC0600GBFC15K LXWMZ92M VCX4 FC Magnetic

from this which is the HDD part number. 

[Dennis Handly · Accepted solution]

HITACHI: vendor (HGST)

HVIPC0600GBFC15K: Model

Unfortunately I can't find anything in http://partsurfer.hpe.com/ for HPE 3PAR SAS Hard Drives.

When I do a google search I get:  640849-001

600GB Fibre Channel hard drive - 15,000 RPM, 3.5-inch large form factor (LFF), 4 Gb/s FC interface, 3PAR drive model HVIPC0600GBFC15K - For use with 3PAR T-Class storage systems, mounted with 3 screws, type DC4, FC, type-2 drive magazine

But you said you had a 8000. ??

[yapkl]

What are you trying to find out or achieve actually?