HPE 3PAR StoreServ Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How to change the 3PAR Service Processor Hostname

 
SOLVED
Go to solution
Highlighted
Visitor

How to change the 3PAR Service Processor Hostname

Is it possible to change the hostname on the service processor by editing the /etc/sysconfig/network file and rebooting the SP? Or is there another procedure I should use?

Dave

5 REPLIES 5
Highlighted
Honored Contributor

Re: How to change the 3PAR Service Processor Hostname

Hi

The service proccesor hostname is fixed and it is set at MOB 

it is always SP(folowed by 3PAR serial number) where the serial number was 5 digits

it is SP000 (serial number).

this is a must by HP.

Regards

 

Highlighted
Honored Contributor
Solution

Re: How to change the 3PAR Service Processor Hostname

Realy?

All my 40 Service Processor have there Hostname in the Company Server Name Rule Style.

It is possible to change it with the GUI:  SPMaint > 2. Network Configuration > 4.Change Public Network Interface Parameters


======================
That was not planned in this way.
Highlighted
Visitor

Re: How to change the 3PAR Service Processor Hostname

I tried changing the hostname via SPMaint > 2. Network Configuration > 4.Change Public Network Interface Parameters  on a test array and it seemed to work just fine in limited testing. Thanks for your help!

Highlighted
HPE Pro

Re: How to change the 3PAR Service Processor Hostname

Hi Dave,

SPID and SP Host name are different, SPID must be SP000+InServS/N, but SP Host name can be changed from SPOCC.

Gary

I am an HPE Employee
Highlighted
Visitor

Re: How to change the 3PAR Service Processor Hostname

Thanks Gary, It's the hostname that I'm concerned about, I understand about the SPID.

Dave