How to view HPE 3PAR 8400 node boot logs

[dekart54]

Hi, please help me with a question:
How to view HPE 3PAR 8400 node boot logs?

Or hint with documentation where I can find the answer to the question.

Thanks

[Cali]

Connect with Serial Cable and capture the Output, while booting.
If available, all other logs can only be read with the root account, and only HPE support has the password.

Cali

[Ramesh_Kumar_P · Accepted solution]

@Cali,

The bootlog will be saved in the below path of the master node.
/var/log/tpd/cage<WWN>/var/log/boot.log

You can capture the Insplore log.
Extract the log and get into the respective node folders and check above path.

Hope this helps.

Thank you!

[Cali]

@Ramesh_Kumar_P 
Thank you for that, that is very good information that I either didn't know or have already forgotten.

Cali

[Ramesh_Kumar_P]

@dekart54,

The bootlog will be saved in the below path of the master node.
/var/log/tpd/cage<WWN>/var/log/boot.log

You can capture the Insplore log.
Extract the log and get into the respective node folders and check above path.

Hope this helps.

Thank you!

[Ramesh_Kumar_P]

@dekart54,

Hope the given information helps. Please let me know if you need any more queries.

Thanks!

[Ramesh_Kumar_P]

@dekart54,

Hope the given information helps and I assume your queries been addressed, since no response to this case.

You may please feel free to open new case if need further assistance.

Thank you!