Need login/password to reset/wipe 3PAR OS 3.X

[Early]

Hi there again.. Sorry to disturb...

So I can access to SP with the adapter through Mfg Port ! Then I need to log in but don´t got any user info.  I can´ t find any default codes for 3PAR with OS Version 3.2.2.612.. Can someone help me that I can log in and finally access the menu to return the Storage in a factory default ? There´s no disks on the Storage, do data to keep.

Thanks again all ! 

[sbhat09 · Accepted solution]

Hello @Early 

Try to connect to CLI using the 3PAR system's IP address via Putty or any other SSH. In CLI, try to login the default credentials or the one you have. If it works, you can try the same from SSMC GUI. Else you need to check the options to reset the password.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[neutral]

Hello @Early,

Please check if these troubleshooting steps help you - https://support.hpe.com/hpesc/public/docDisplay?docId=sf000050333en_us&docLocale=en_US 

[Early]

Hi  @sbhat09  thanks for your help but still block at this step, I can´t log in with the credentials I have , I would need special default credential to log and reset the system. OS is 3.X, can´t find any default login / password for this version ... 

[Early]

@neutral @sbhat09  Thanks for your help. Found the Solution !!! 

Greetz

[sbhat09]

Hello @Early,

That is great to know. May I know what worked finally?

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.