Steady Amber LED is still On after replacemnet 3PAR failed Disk

[Kaveh-Arc]

Hi,

We have replaced a failed disk in 3PAR 7200,  before we replace the failed hard disk on 3PAR7200  the Servicemag status was succeeded and there is no data left on the disk, after replacement, the servicemag ran automatically and after a couple of hours, it completed successfully, everything is normal, there is no any disk in result of "showpd -failed -degraded" the new disk is normal state in the result of "showpd -s" and "showpd -c" . the result of " servicemag status" is: No servicemag operations logged".  but the Amber light still is on. 

Any idea?

Thanks

[Kaveh-Arc]

This issue has been fixed. Restarting the LoopB on the cage cleared the amber on the replacement HDD

[윤정현]

hi
I have the same symptom.

"Restarting the LoopB on the cage", please give me the "command"

[Sunitha_Mod]

Hello @윤정현,

Thank you for posting. 

You might want to consider creating a new topic by utilizing the "New Discussion" button, as this will not only enhance visibility compared to the old topic but also boost your chances of receiving responses from experts.

[Rachid Jarouy_1]

This may be used to solve the issue:

locatecage -t 0 cage3 0