SW LAN name and port conection

[lober]

Hello community, I need to know the name of the sw LAN and the port where the administration port of a Storage Primera and SW Brocade is connected. Is it possible to find this information by running some command in the Storage and in the sw san? ...if possible.... which command could I use?

Thanks in Advance 

[Satish04]

Hi lober,

To find the name of the LAN and the port where the administration port of an HPE Primera storage system is connected, please use the below commands.

Run the command "shownet" on HPE Primera. This will display the network configuration information, including the LAN and port to which the administration port is connected.

Run the command "netstat" on the Brocade SAN switch. This command will display information about the connected devices, including their names and ports.

Hope this helps.

Regards,
Satish

[Cali]

For Brocade SAN Port connection try:

showportdev fcswitch 0:3:1 < Primera Port
showportdev fcfabric 0:1:1
showportdev ns 0:3:1

Cali

[Sunitha_Mod]

Hello @lober,

Let us know if your concern has been addressed.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.