What does really measure the statport -host command?

[Jose Miguel_1]

Hi team,

Please, could you give some explanations about what the command "statport -host" do?.

Which is the diference with respect to statvlun command ?

Thanks

Jose Miguel.

[AnilKT]

 Hi Jose Miguel_1 

Statport -host

          Specifies to display only host ports (target ports), only disk ports (initiator ports), only Fibre Channel Remote Copy configured ports, or only Fibre Channel ports for Data Migration.

When a physical port is hosting multiple virtual ports, e.g. when port failover is active, statport indicates the aggregate statistics for all virtual ports on the physical port.

The statvlun command displays statistics for virtual volumes and LUN hosts attachments.

For more information on CLI commands, please refer to the link

https://support.hpe.com/hpesc/public/docDisplay?docId=c04204279&docLocale=en_US

Hope this helps.!

Regards

Anil  

[veeyarvi]

Hi Jose,

In simple words,

'statport -host' only provides read/write (I/O) statistics about the host ports of the array.

'statvlun', on the otherhand, all about the LUN statistics and vast options are available. As suggested before, refer the CLI guide for all options associated with statvlun command.

Regards,
Veeyaarvi

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you have no further query, and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.