HPE Community
HPE 9000 and HPE e3000 Servers
1754947 Members
2749 Online
108827 Solutions
New Discussion юеВ

Can't see DLT7000 tape drive on T Class

 
SOLVED
Go to solution
Alan Wilson
Occasional Contributor

тАО02-27-2002 02:21 AM

тАО02-27-2002 02:21 AM

Can't see DLT7000 tape drive on T Class

Our T-Class server can't see
a HP DLT7000 tape drive i.e ioscan does not show the hardware.
We are using HP-UX 10.20
do we need to install a patch
for the server to recognise the tape drive?
If your'e going to shoot, shoot don't talk
0 Kudos
3 REPLIES 3
Vincent Farrugia
Honored Contributor

тАО02-27-2002 03:04 AM

тАО02-27-2002 03:04 AM

Re: Can't see DLT7000 tape drive on T Class

Hello,

Check the SCSI ID you gave to the DLT drive. you may have a SCSI conflict.

HTH,
Vince
Tape Drives RULE!!!
0 Kudos
Carlos Fernandez Riera
Honored Contributor

тАО02-27-2002 03:05 AM

тАО02-27-2002 03:05 AM

Solution

Re: Can't see DLT7000 tape drive on T Class

At least you must include scsi, scsi2, tape2 and stape driver in your kernel.
unsupported
George_Dodds
Honored Contributor

тАО02-28-2002 07:12 AM

тАО02-28-2002 07:12 AM

Re: Can't see DLT7000 tape drive on T Class

May sound obvious and i bet you've done it anyway, but have you tried another scsi cable?
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.