cant not find patch for L2000

[cold]

I need firmware GSP for rp5450(L2000)but his no.I searched on itrc.hp.com but has no found.
Say please where possible take this patch?

[Mridul Shrivastava]

Hi,

Latest PDC Version is 44.28 GSP Version A.01.12 can be loaded using the follwing patches
PHSS_31800 11.00 Patch
PHSS_31801 11.11 Patch

I hope this helps ;)

[cold]

I have installed PHSS_32705.PDC was update befor 44.28.Firmware GSP did not change.Remained A.01.09.
Has found faq : http://archives.neohapsis.com/archives/hp/2002-q4/0042.html

[Mridul Shrivastava]

did the upgrade finished successfuly and there was no interuption at the time GSP upgrade was happening? If no then try installing it again.. remember not to power cycle the box else GSP may be unusable if FW upgrade did not happen successfully.

[cold]

That you say about faq http://archives.neohapsis.com/archives/hp/2002-q4/0042.html
is it there spoken that GSP firmware is put separate patch.

[Mridul Shrivastava]

I checked the details of the patch and found that it does not contain the upgrade for GSP.Update GSP firmware to revision A.01.12. Firmware revision A.01.12 is available at the following site for download:

http://itrc.hp.com/

The procedure to download firmware patches is described below. Three methods are available.

Method #1: Downloading the Firmware Patch via the World Wide Web:

Connect to the Hewlett Packard IT Resource Center (HP-ITRC) World Wide Web home page at their URL by entering the following:
http://itrc.hp.com

Under the "Maintenance/Support" menu, select "Individual Patches".
If you are a previously registered user:
a. Login, entering your User ID and password, then click "GO".
This will take you to the "Patch Database Main" screen. Now continue to step 4.

If you are a first time user:

a. Click on "Register Now". European customers should use the European site.
b. Review the "Terms and Conditions" page. At the bottom of the page you may accept the "terms and conditions" and proceed to the registration page.
c. Complete the registration information requested.
d. Once the registration information has been successfully transmitted, the "Registration - Confirmation"
screen will appear. Write down the IT Resource Center User ID (or print the screen) for later
reference. Now click on the "Continue" button and proceed with step 4 below.

Select the "Firmware Patches" option.
Select the "CPU Patches" option search for patch PF_CPREGSPA0112.
Select the appropriate patch (for example: PF_CPREGSPA0112). Patch description and installation instructions will appear. Click on the "DOWNLOAD" button to copy the patch to your system.

[cold]

I am registered on european.But when begin searching for(PF_CPREGSPA0112) he speaks me:
patch ids not found
Europe
The specified Patch IDs were not found, try searching by keyword.
If you has this patch can to place him?
you me much help

[Andrew Rutter]

hi cold,

its here, its in the archive depot

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.tar.gz

and details for installation here

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu/PF_CPREGSPA0112.txt


Andy

[cold]

Many thanks

[Andrew Rutter]

hi cold, you are welcome

I didnt realise you are a new forumer until now.

Please read this guide which hopefully will help you understand how the forum works, and how to say thanks by assigning points and closing threads.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=140137

Im sure you will find this a very useful tool, and line of support in the future

Andy