Could not access lan console - L 1000

[Venu_2]

hi all,

I am not able to access my L-1000 through LAN-console. I have adopted the following procedure to access.

Procedure:

1. say ip of to the lan console is 192.0.0.10

2. From windows 95 pc i am giving

telnet 192.0.0.10

3. System will prompt for login and password

Service Processor login: admin
Service Processor password:

Hewlett-Packard Guardian Service Processor


9000/800/L1000-36 System Name: Lclass

[Read only - use ^Ecf for console write access.]

4. if i type ctrl-E and cf

[bumped user - admin]

this is the mesg i am getting, what is wrong ?

Any help would be appreciated.

TIA

Venu

[Patrick Wessel]

Venu,
So far is nothing wrong.
What happened after the [bumped?] message? Nothing? Did you already try to reset the GSP? (from the OS on the L-Class type: stty +resetGSP

[Venu_2]

After bumped user mesg

no key stroke is working.

Is it a must to reset the GSP?

what all will i need to reconfigure if i do it?

TIA

venu

[Patrick Wessel]

Venu,
The reste is like a power cycle of the GSP. You will noy lose the configuration of the GSP. You can do it even with the OS up and running. It will do no harm to the system.

[Carlos Fernandez Riera]

HP-UX Forum is great...

10 points to Patrick