doc for rp5470 L3000 memory carrier number position

[Intec Billing Unix Supp]

I've got an L3000 which needs memory replaced but I can't find a doc showing memory carrier numbers and they're not labeled in the server. Any suggestions?

[Jeff Schussele]

Hi,

Here you go.
This has all the info you'll need.

http://www.docs.hp.com/en/A5191-96018/index.html

HTH,
Jeff

[Intec Billing Unix Supp]

I've seen this doc before. It doesn't illustrate the carrier number positions.

[Jeff Schussele]

It does.
Look in section 3 "Installing Memory" bullet #6.

Rgds,
Jeff

[Robert-Jan Goossens_1]

Check this doc.

Document description: RP54x0 Memory Configuration Rules
Document id: KBAN00001102

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000075965131

US
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000075965131

Regards,
Robert-Jan

[Intec Billing Unix Supp]

Jeff, the diagram I see shows two carriers but it doesn't label them 0 and 1. I still can't tell which one is which.

Robert-Jan. Again, it doesn't tell me which carrier is 0 and which is 1.

Both of my carriers are full, 256 MB DIMMS. I need to replace Carrier 1 3A and 3B.

[Robert-Jan Goossens_1]

Check this doc, page 22

US
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000059413427

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000059413427

[Intec Billing Unix Supp]

Robert-Jan, I see the diagram but it doesn't indicate which is carrier 0 and which is carrier 1.

[timmy b. · Accepted solution]

I have attached a screen capture for you. It shows the positioning of the memory carriers for you.

There also may be a diagram on the air baffle located under the top cover. I know it talks about cpu placement there, memory may be covered as well.

I hope this answers your question.

Good Luck - Tim

[Intec Billing Unix Supp]

Tim, That's exactly what I needed. Thanks.