gsp attention light

[lawrenzo]

hello,

We have several errors on a server gsp which is showing a yellow attn light.

How can we clear all the errors and reset the light?

Thanks

[RAC_1]

Log onto gsp. Choose SL (chasis logs)
Check and it should go away.

[lawrenzo]

yes we have doen that, how can we ack the alerts to make them disapear

thanks

[D Block 2]

Anil (RAC) did mention that you must page all the Messages in the GSP..

also, read up on the: FRULED manpage, to turn off ALL cell and I/O chasis service LEDs.

[Suraj Singh_1]

Hi,

Log on to GSP using Admin, select SL (Show Event Logs), Press E (System Event), Press T (View mode configuration - Text) and press Enter. Go through these logs, and you may find some event which require your immediate attention.) Once you have gone through these logs, the Yello attn. LED will go away, and it will turn Green.

HTH,
Suraj

[Steven E. Protter]

From the Console

Ctrl-b

Enter through the authenticataion.

SL as shown above and the attention light will go off as you finish going through the items.

Take a moment to read them, they might give you a clue as to what happened.

SEP

[Devesh Pant_1]

I would really look through the logs before deleting them. However this is very common with the Superdomes. any simple log causes the red light alert flashing on the front panel.

Devesh

[R.KrishnaKumar]

Login to GSP or Use Ctrl+B from console to got to GSP.

View the System log by giving the command SL.
also view the event log by giving the command E & T (for text view)

just scroll down and see for any errors, This should go off the LED's

regds..
Krishna

[Hilary Nicholson]

As mentioned before, reading the error logs in the GSP will stop the light flashing.

I have also been tempted to paint over it as every time we reboot our server, the attention light comes back on!

Regards,

Hilary

[Sandman!]

Just my two cents after the voluminous posts:

1. Login to GSP thru the console or webconsole after typing Ctrl-b.
2. From the GSP prompt go to the SL menu
GSP> sl
3. Under the SL menu select option "e" for displaying the error logs.
4. Don't "Set up filter options on this buffer"
5. type "q" to quit the SL menu
6. type "co" to return to the console
GSP> co


enjoy!