GSP Red, OS up. Help!!

[hp-me]

We have an N-Class , running 11.0

9000/800/N4000-75
B.11.00 U 9000/800 1628329386 unlimited-user license

pressed the reset button, and it never came back. no console, nothing. PLEASE HELP.

tried the #stty +reset thing - nothing works.

[Steven E. Protter]

Go to console

Ctrl-b

sl

read and report the error messages.

This is serious, prepare for immediate downtime.

SEP

[Helen French]

Did you mean no messages on console? Any reason why you restarted the system? What's the light indication? Is the system powered on? Check console connections? Are the disks and peripherals powered on?

[hp-me]

the rest of the system is up and running, there is nothing on the console. no ctl B does not work.

seem like the board has lost firmare or corrupt firmware.

[Ken Hubnik_2]

Call HP support. You probably lost your GSP board.

[Dario_1]

Hi!

Time to call HP. Good luck!!!

Regards,

Dario

[Donny Jekels · Accepted solution]

If your OS is up and running, plan downtime. Get a new I/O card, backup your system. Make an ignite tape.

Do not reboot your box before you have all of this done.

The i/o card and gsp is on the same blade.

Don't sweat it man, its Hardware! You probibly locked up the firmware or something.

Relax, have a cup of coffee, and swap out the boards. You should be good.

[Caesar_3]

Hello!

In this case i hope you have HP suport
because is the time to use it and replace
the GSP card.

Caesar