How to find the power supply info

[jazzspot]

I'm looking for the power supply unit(s) info on our 9000/800/L2000-36 server. I've tried sam and other commands to locate this info, but so far no success. Is there a hardware command for me to extract this info from this server?

[Jeff_Traigle · Accepted solution]

You can't see power supply info from the OS as far as I know. Access the GSP and issue the PS command to see power management module status.

[jazzspot]

Thanks... but I didn't want to have to bring the server down to single user mode.

[Vishu]

Hi,

To access GSP, you dont need to down the server to single user mode.

What you need to do is to just access your server console and press ctrl+B from there to access GSP and then issue the PS command from there.

[Raj D.]

Jazzspot,

Log on to GSP ,
--USe Ctrl+B

-- At GSP prompt: use CM then PS .

GSP:> CM
GSP:CM>


GSP:CM> PS # PS for power status.



Cheers,
Raj.

[R.K. #]

Hi Jazzspot,

As said you need to access the server from MP ip.
You will get a "GSP>" prompt.
There is no need to bring the server to any mode for this. Simply do this:

GSP> ps

Attached is o/p of "ps" command from GSP.

Regds..

[Javed Khan_1]

Hi,

Alternatively you can get this info from OS

run cstm --> cstm>sel dev all --> cstm>info -->cstm>infolog

#############Sample Output##########

Cabinet 0 Hardware Inventory:
Component Slots Present Failure State
--------- ------- ------- ------- -------
Cabinet Fans (blowers) 8 8 1 NA
Cabinet Power Supplies 2 2 0 NA

FAILED FANS

Fan 2 : Performance Lags

[Johnson Punniyalingam]

>>Thanks... but I didn't want to have to bring the server down to single user mode<<

Using the MP - Login " Need not bring in Single User mode"

How to check for Power Supply & Fan status:
========================================
GSP> ps

PS

Power Monitor Status:
Firmware Revision : 5
System Power state: On Power Switch : On
Temperature : Normal Selected fan state: Normal

Power supplies | Fan
# State Type | States
-----------------------------------------------------------
0 Fault Type 0 | Normal
1 Normal Type 0 | Normal
2 Normal Type 0 | Normal
3 - - | Normal
4 - - | Normal
5 - - | Normal
6 - - | Normal
7 - - | Normal


Show the list of GSP commands:
============================
GSP> he

HE

[Viveki]

#cstm
#cstm>sel dev all
#cstm>info
#cstm>infolog

check for the entries "power supplly".

[jazzspot]

Thanks to everyone for you assistance!!!