hp rp2470

[Reezie]

I have 4 of these systems that currently have a flashing amber LED by Attn:

Recently we lost power in a temporary power outage. How can I start the troubleshooting process to determine what this error message means?

Thanks, Reezie

-------------------------------

P.S. This Thread has been moved from Servers --> General to Servers --> HP 9000 - Forum Moderator

[DCE]

Reezie,

Log into the GSP and review the logs. ( the command is SL I believe).

This will do two things
1. you will see what he error is
2. It should reset the LED

HTH
Dave

[Torsten.]

I'm pretty sure you will find messages like

"power failed or disconnected" when you view the logs. This is normal after a power outage.

GSP>sl

Once you read the logs, the LED will go off.

[Reezie]

Thank you for your responses. I have to admit that I am a newbie. How does one go about logging into GSP? I tried rlogin to server and Control b but that does not work .. thanks for your help!

[Torsten.]

The GSP (guardian service processor) is like a small PC inside the server. You can configure an own IP address to it or just connect a serial terminal or notebook with terminal emulation (speed 9600) to the console port by using a null-modem cable.