HP-UX replacement of Mirrored disk question

[Lawrence Kaufman]

I have an HP-UX system where the previous admin set up LVM mirroring with Physical Volume groups. With the following example, how would I replace and resync the pv /dev/dsk/c8t9d0. I have an idea, but I am looking for the easiest way to do this.  

 --- Physical volume groups ---

   PVG Name                    vg01pvg1                  

   PV Name                     /dev/dsk/c5t0d0           

   PV Name                     /dev/dsk/c5t1d0           

   PV Name                     /dev/dsk/c5t2d0           

   PVG Name                    vg01pvg1m                 

   PV Name                     /dev/dsk/c8t8d0           

   PV Name                     /dev/dsk/c8t9d0           

   PV Name                     /dev/dsk/c8t10d0  

There is only one lvol in the vg01 volume group 

/dev/vg01/lvol1 

Any help would be greatly appreciated 

Larry K. 

[support_s]

System recommended content:

1. HP-UX 11i v3 Operating Environments - How to Replace a Mirrored Nonboot and Boot Disk

If the above information is helpful, then please click on "Thumbs Up/Kudo" icon.

Thank you for being a HPE community member.