HP9000 800/G50 Colnsole Cable

[jeonmins]

Our system is HP 9000 800/G50.
Unfortunately, our console broke down to use HP 9000 and can not use Telnet service.
We want to connect to COM1 Port of PC instead of console if it is possible.
We know that HP 9000 800/G50 server's console use 6 Pins Port and PC COM1 port use
9 Pins (rs-232c).

How can we set and connect PC COM1 port instead of console?
Please give some idea that we can set this up.

Thank you.

[Dave Unverhau_1]

Probably the easiest thing to do is to use a modem cable on the PC
and connect it to the DB-25 end of the G50's console cable
with a female-female DB-25 adapter (no crossover).

Regards,

Dave

[T G Manikandan]

check this link
http://bizforums.itrc.hp.com/cm/QuestionAnswer/1,,0xbe0f237a4bc6d611abdb0090277a778c,00.html


Thanks

[Richard Steven]

You need cable HP C2933A DB25 Female --> DB9 Male.

You can use Windows Hyperterminal or the better ttwin.(ttwin.com)

:-)

[Richard Steven]

OOOPpss the code is 24542G

Sorry