MP login

[khilari]

Hi guys, i wanted to know that once i am in the mp login, what can i do. I get the co and cm options. But, what can and how can i do stuff being in MP. sOME EXAMPLES would be great.
Thanks

[Murat SULUHAN]

Hi

http://docs.hp.com/en/5991-6006/ch01s01.html

Best Regards
Murat

[David Bellamy]

Hello Khilari
you can do things like boot your server,check
chassis log, just type he when you in there and it will show you all the available options.

[Tim Nelson]

Piles of stuff.

Type in HE then LI when you get there..These all depend on HW model but most are the same.

Typical Examples:
SL -show logs
CL -Console Logs
PC -Remote power control
LC -Configure MP LAN
SS -Processor status
RS -Reset
TC -Transfer of Control
VFP -Virtual Front Panel
and on..
and on..

[Arun Vijay V C]

HI Khilari,
find the attched doc..hope this will help u a lot.

[Grayh]

Detailed help on commands is available from the main menu (MP> he)



The following are the Service commands that are available



BO : Boot a partition.

DATE : Set the time and date

DF : Display FRU information of an Entity.

FW : Obsolete

DFW : Obsolete

MA : Return to the Main menu.

OSP : Obsolete

PE : Power entities on or off.

PWRGRD : Allows user to configure the power grid

RE : Reset entity.

RR : Reset a partition for reconfiguration.

RS : Reset a partition.

SYSREV : Returns all System Revisions

TC : Send a TOC signal to a partition.





The following are the Service commands that are available



TE : Broadcast a message to all users of the MP Command Handler.

WHO : Display a list of MP connected users

LOC : Display and Set Locator LED status.





The following are the Status commands that are available



CP : Display partition cell assignments

DE : Display entity status

DU : Display devices on bus

HE : Display the list of available commands

LS : Display MP LAN configuration

PS : Display detailed power and hardware configuration status.





The following are the System and Access Config commands that are available



CA : Obsolete; Only displays local rs232 parameters

CC : Initiate a Complex Configuration

CG : Obsolete

UPS : Set parameters for ups monitoring via snmp

SNMP : Set SNMP daemon parameters

CP : Display partition cell assignments

DC : Reset parameters to default configuration

DI : Disconnect remote, telnet, web, or ssh consoles

ID : Change certain stable complex configuration profile fields

IF : Displays network interface information

IT : Modify command interface inactivity timeout

LC : Configure MP LAN interface

LS : Display MP LAN configuration

PARPERM : Enable/Disable Interpartition Security





The following are the System and Access Config commands that are available



PD : Modify default Partition for this login session.

RL : Rekey Complex Profile Lock

RU : Reset MP bus device

SA : Display and Set MP Remote Access

SO : Configure User Security Options

XD : MP Diagnostics and Reboot


The below are some examples from my lab server rp8440


[kona] MP:CM>

[kona] MP:CM> bo



This command boots the selected partition.





Part# Name

----- ----

0) kona_npar0

1) kona_npar1



Select a partition number: 0



Do you want to boot partition number 0? (Y/[N]) n



-> The selected partition will NOT be booted.

[kona] MP:CM>

[kona] MP:CM> date



This command sets the date and time on the MP.



Current date is: 08/09/2006

Do you want to modify it? (Y/[N])



Current time is: 11:33:10

Do you want to modify it? (Y/[N])

[kona] MP:CM>

[kona] MP:CM> df



This command displays the FRU ID information for the selected FRU.



Do you want a specific FRU or a dump? ([S]/D) s



B - Bulk Power Supply

G - Management Processor (Core I/O)

S - System Backplane

O - Core IO Backplane (exists only in the IOX cabinet)

P - PCI Backplane

I - PCI Power Module

M - Mass Storage Backplane

C - Cell Board

H - Cell Board Controller (PDHC)

U - Cell Board Processor Module (PIROM)

X - Cell Board Processor Module (FRU)

Y - Cell Board Processor Power Module (PPM)

D - Cell Board Memory (DIMM)

Select FRU : g



Enter cabinet number (0 or 8): 0

Enter Core IO number: 0



The Entity you have selected is Core I/O

FRU ID Definition Revision : A

Artwork Revision : A2

Engineering Date Code : XXXX

Part Number : AB314-60101

Serial Number : SS0506P0267

FRU Name : KONA CORE IO

Scan Revision : 0x100

FRU Specific Information : A0033

MAC Address : 00:12:79:b3:0d:9a

Checksum : 0x6f (valid)

Manufacturing and Test History :

Field 0 0xffffffffffffffffff

Field 1 0xffffffffffffffffff

Field 2 0xffffffffffffffffff

Field 3 0xffffffffffffffffff

Field 4 0xffffffffffffffffff

Field 5 0xffffffffffffffffff

Field Spare 0xffff

[kona] MP:CM> df



This command displays the FRU ID information for the selected FRU.



Do you want a specific FRU or a dump? ([S]/D) s



B - Bulk Power Supply

G - Management Processor (Core I/O)

S - System Backplane

O - Core IO Backplane (exists only in the IOX cabinet)

P - PCI Backplane

I - PCI Power Module

M - Mass Storage Backplane

C - Cell Board

H - Cell Board Controller (PDHC)

U - Cell Board Processor Module (PIROM)

X - Cell Board Processor Module (FRU)

Y - Cell Board Processor Power Module (PPM)

D - Cell Board Memory (DIMM)

Select FRU : g



Enter cabinet number (0 or 8): 8

Enter Core IO number: 0



The Entity you have selected is Core I/O

FRU ID Definition Revision : A

Artwork Revision : A2

Engineering Date Code : XXXX

Part Number : AB314-60101

Serial Number : SS0506P0265

FRU Name : KONA CORE IO

Scan Revision : 0x100

FRU Specific Information : A0033

MAC Address : 00:12:79:b3:0e:16

Checksum : 0xea (valid)

Manufacturing and Test History :

Field 0 0xffffffffffffffffff

Field 1 0xffffffffffffffffff

Field 2 0xffffffffffffffffff

Field 3 0xffffffffffffffffff

Field 4 0xffffffffffffffffff

Field 5 0xffffffffffffffffff

Field Spare 0xffff

[kona] MP:CM> df



This command displays the FRU ID information for the selected FRU.



Do you want a specific FRU or a dump? ([S]/D) d



A - ALL - All FRU devices in a cabinet.

B - Bulk Power Supply

G - Management Processor (Core I/O)

S - System Backplane

O - Core IO Backplane (exists only in the IOX cabinet)

P - PCI Backplane

I - PCI Power Module

M - Mass Storage Backplane

C - Cell Board

Select FRU : a



Enter cabinet number (0 or 8): 0



The Entity you have selected is ALL

Retrieving information for 28 FRU(s)



WARNING: Checksum is not valid for FRU PCI PM: Location 0, 0



WARNING: Checksum is not valid for FRU PCI PM: Location 0, 1



28 of 28 FRU IDs were retrieved and valid





------------------------------------------------------------------------------

Fru Name Part Name Loc Serial Num Art Eng Scan R Fru Spec.

Manf Test Hist. 0 Manf Test Hist. 1 Manf Test Hist. 2 CC V FR

Manf Test Hist. 3 Manf Test Hist. 4 Manf Test Hist. 5 Spare

------------------------------------------------------------------------------

BULK PS 0950-3794 0 4002470729 47 4802 0x100 A1000

000000000000000000 000000000000000000 000000000000000000 97 Y A

000000000000000000 000000000000000000 000000000000000000 0000

BULK PS 0950-3794 1 AD304701413 47 1002 0x100 A1000

000000000000000000 000000000000000000 000000000000000000 b5 Y A

000000000000000000 000000000000000000 000000000000000000 0000

BULK PS 0950-3794 2 GOLDEN EN 1002 0x100 A1000

000000000000000000 000000000000000000 000000000000000000 ea Y A

000000000000000000 000000000000000000 000000000000000000 0000

MASS STOR BP AB297-60104 SST0520058-H A3 FP3B 0x1

000000000000000000 000000000000000000 000000000000000000 90 Y A

000000000000000000 000000000000000000 000000000000000000 0000

KONA PCIX BP AB297-60501 0,0 SST053001R-U A4 FP3D 0x2 02470247

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 8c Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA PCIX BP AB297-60501 0,1 SST053001R-U A4 FP3D 0x2 02470247

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 8c Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

Please, type to continue, Q to quit, or S to stream: s





------------------------------------------------------------------------------

Fru Name Part Name Loc Serial Num Art Eng Scan R Fru Spec.

Manf Test Hist. 0 Manf Test Hist. 1 Manf Test Hist. 2 CC V FR

Manf Test Hist. 3 Manf Test Hist. 4 Manf Test Hist. 5 Spare

------------------------------------------------------------------------------

PCI POWER MODULE 0950-4511 0,0 87406050406L 06 0504 0x100 0062

000000000000000000 000000000000000000 000000000000000000 fa N A

000000000000000000 000000000000000000 000000000000000000 0000

PCI POWER MODULE 0950-4511 0,1 87406050402L 06 0504 0x100 0062

000000000000000000 000000000000000000 000000000000000000 fe N A

000000000000000000 000000000000000000 000000000000000000 0000

KONA CORE IO AB314-60101 0,0 SS0506P0267 A2 XXXX 0x100 A0033

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 6f Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA CORE IO AB314-60101 0,1 SS0506P0271 A2 XXXX 0x100 A0033

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff f3 Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA SYSTEM BKPL AB297-60502 SST052201G-V A5 FP3 0x100 2662660100

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 66 Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA CELL BOARD AB313-60401 1 PR205290WR 3A XB02 0x2 B0225 B CD 00

a00105100301010000 000000000000000000 000000000000000000 0b Y A

000000000000000000 000000000000000000 000000000000000000 0000

KONA CELL BOARD AB313-60401 3 PR2052509T 3A XB01 0x2 B0225 B CD 00

a00105070801010000 a00305070901010000 000000000000000000 ea Y A

000000000000000000 000000000000000000 000000000000000000 0000

mad16-6m 1,0 0x1 1B6400C8 F73

01014c343330000000 423931304534000000 3150726f3030000000 12 Y -

303336004d43000000 4b4131303333000000 000000000000000000 0000

mad16-6m 1,2 0x1 1B6400C8 F73

01014c343330000000 423931304534000000 3150726f3030000000 12 Y -

303630004d43000000 4b4131303235000000 000000000000000000 0000

MADB2-6M AB548-04001 3,0 PR10439WT1 X332 0x1 1Z6400C8 F82

ffffffffffff000000 ffffffffffff000000 ffffffffffff000000 0e Y B

ffffffffffff000000 ffffffffffff000000 000000000000000000 0000

madm16 AB548-04001 3,1 PR10439WYJ X332 0x1 1Z64010B B82

ffffffffffff000000 ffffffffffff000000 ffffffffffff000000 30 Y B

ffffffffffff000000 ffffffffffff000000 000000000000000000 0000

MADB2-6M AB548-04001 3,2 PR10442X5T X332 0x1 1Z6400C8 F82

ffffffffffff000000 ffffffffffff000000 ffffffffffff000000 0d Y B

ffffffffffff000000 ffffffffffff000000 000000000000000000 0000

MAMM2-1GB A9843-60101 1,0A PR205131P0 B XA03 0x1

000000000000000000 000000000000000000 000000000000000000 22 Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 1,0B PR205131NL B XA03 0x1

000000000000000000 000000000000000000 000000000000000000 3c Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,0A PR20505081 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 09 Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,0B PR20505084 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 0c Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,1A PR205041M0 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 1d Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,1B PR2050509F B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 1f Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,2A PR205050D2 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 16 Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,2B PR205050D5 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 19 Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,3A PR2050638S B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 2f Y A

000000000000000000 000000000000000000 000000000000000000 0000

MAMM2-1GB A9843-60101 3,3B PR205063D3 B XA01 0x1

000000000000000000 000000000000000000 000000000000000000 1b Y A

000000000000000000 000000000000000000 000000000000000000 0000



[kona] MP:CM> df



This command displays the FRU ID information for the selected FRU.



Do you want a specific FRU or a dump? ([S]/D) d



A - ALL - All FRU devices in a cabinet.

B - Bulk Power Supply

G - Management Processor (Core I/O)

S - System Backplane

O - Core IO Backplane (exists only in the IOX cabinet)

P - PCI Backplane

I - PCI Power Module

M - Mass Storage Backplane

C - Cell Board

Select FRU : a



Enter cabinet number (0 or 8): 8



The Entity you have selected is ALL

Retrieving information for 11 FRU(s)



WARNING: Checksum is not valid for FRU PCI PM: Location 0, 0



WARNING: Checksum is not valid for FRU PCI PM: Location 0, 1



11 of 11 FRU IDs were retrieved and valid





------------------------------------------------------------------------------

Fru Name Part Name Loc Serial Num Art Eng Scan R Fru Spec.

Manf Test Hist. 0 Manf Test Hist. 1 Manf Test Hist. 2 CC V FR

Manf Test Hist. 3 Manf Test Hist. 4 Manf Test Hist. 5 Spare

------------------------------------------------------------------------------

BULK PS 0950-3794 0 94024TJ00064 4T 0241 0x100 A1000

000000000000000000 000000000000000000 000000000000000000 05 Y A

000000000000000000 000000000000000000 000000000000000000 0000

BULK PS 0950-3794 1 94024TJ00069 4T 0241 0x100 A1000

000000000000000000 000000000000000000 000000000000000000 0a Y A

000000000000000000 000000000000000000 000000000000000000 0000

MASS STOR BP AB297-60104 SST0520032-H A3 FP3B 0x1

000000000000000000 000000000000000000 000000000000000000 88 Y A

000000000000000000 000000000000000000 000000000000000000 0000

KONA PCIX BP AB297-60501 0,0 SST0522004-U A4 FP3B 0x2 02470247

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 6c Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA PCIX BP AB297-60501 0,1 SST0522004-U A4 FP3B 0x2 02470247

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 6c Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

PCI POWER MODULE 0950-4511 0,0 87406050400G 06 0504 0x100 0062

000000000000000000 000000000000000000 000000000000000000 05 N A

000000000000000000 000000000000000000 000000000000000000 0000

Please, type to continue, Q to quit, or S to stream: s





------------------------------------------------------------------------------

Fru Name Part Name Loc Serial Num Art Eng Scan R Fru Spec.

Manf Test Hist. 0 Manf Test Hist. 1 Manf Test Hist. 2 CC V FR

Manf Test Hist. 3 Manf Test Hist. 4 Manf Test Hist. 5 Spare

------------------------------------------------------------------------------

PCI POWER MODULE 0950-4511 0,1 874060504049 06 0504 0x100 0062

000000000000000000 000000000000000000 000000000000000000 0f N A

000000000000000000 000000000000000000 000000000000000000 0000

KONA CORE IO AB314-60101 0,0 SS0506P0265 A2 XXXX 0x100 A0033

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ea Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

KONA CORE IO AB314-60101 0,1 SS0506P0201 A2 XXXX 0x100 A0033

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 93 Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

IOX SYSTEM BP AB301-60501 SST0522005-L A2 XA01 0x2 2662660075

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff 49 Y A

ffffffffffffffffff ffffffffffffffffff ffffffffffffffffff ffff

IOX CIO BP AB301-60302 SST052200O-M A1 4C01 0x100

000000000000000000 000000000000000000 000000000000000000 ed Y A

000000000000000000 000000000000000000 000000000000000000 0000



[kona] MP:CM>

[kona] MP:CM> fw



FW



This command is OBSOLETE. Use the FW command from the main menu.





[kona] MP:CM>

[kona] MP:CM> dfw



DFW



This command is OBSOLETE. Use the FW command from the main menu.





[kona] MP:CM>

[kona] MP:CM> ma

[kona] MP:CM>



MP MAIN MENU:



CO: Consoles

VFP: Virtual Front Panel

CM: Command Menu

CL: Console Logs

SL: Show Event Logs

FW: Firmware Update

HE: Help

X: Exit Connection



[kona] MP> cm





Enter HE to get a list of available commands



(Use ^B to return to main menu.)









[kona] MP:CM>

[kona] MP:CM> osp



OSP



This command is OBSOLETE. Use the FW command from the main menu.





[kona] MP:CM>

[kona] MP:CM> pe



This command controls power enable to a hardware device.



T - Cabinet

C - Cell

P - IO Chassis

X - Complex

R - Partition

Select Device: t



Enter cabinet number (0 or 8): 0



The power state is ON for Cabinet 0.

In what state do you want the power? (ON/OFF) q

[kona] MP:CM>

[kona] MP:CM> pwrgrd



The current power configuration is: Single grid



Power grid configuration preference.



1. Single grid

2. Dual grid



Select Option: q





[kona] MP:CM>

[kona] MP:CM> re



This command resets a hardware device.



C - Cell

P - IO Chassis

S - System Backplane

Select device: s



Enter cabinet number (0 or 8): 0



Do you want to reset the Main Backplane? (Y/[N]) n



-> The selected device(s) will NOT be reset.

[kona] MP:CM>

[kona] MP:CM> rr



This command resets for reconfiguration the selected partition.



WARNING: Execution of this command irrecoverably halts all system

processing and I/O activity and restarts the selected

partition in a way that it can be reconfigured.





Part# Name

----- ----

0) kona_npar0

1) kona_npar1



Select a partition number: 0



Do you want to reset for reconfiguration partition number 0? (Y/[N]) n



-> The selected partition will NOT be reset for reconfiguration.

[kona] MP:CM>

[kona] MP:CM> rs



This command resets the selected partition.



WARNING: Execution of this command irrecoverably halts all system

processing and I/O activity and restarts the selected

partition.





Part# Name

----- ----

0) kona_npar0

1) kona_npar1



Select a partition number: 0



Do you want to reset partition number 0? (Y/[N]) n



-> The selected partition will NOT be reset.

[kona] MP:CM>

[kona] MP:CM> sysrev



Cabinet firmware revision report



PROGRAMMABLE HARDWARE :



System Backplane : GPM EMMUX

----------- -----------

001.001.000 001.000.000



IO Backplane : IO_LPM-0 IO_LPM-1

----------- -----------

001.001.001 001.001.001



Core IO : CIO-0 CIO-1

----------- -----------

001.002.000 001.002.000



CELL_LPM CELL_JTAG CELL_PDH

----------- ----------- -----------

Cell 0 : 000.000.000 000.000.000 000.000.000 - not installed

Cell 1 : 001.001.000 001.001.000 001.002.000

Cell 2 : 000.000.000 000.000.000 000.000.000 - not installed

Cell 3 : 001.001.000 001.001.000 001.002.000



FIRMWARE:



Core IO

MP-0 : B.001.003.004

ED-0 : 002.001.000

MP-1 : B.001.003.004

ED-1 : 002.001.000



Cell 0 - not installed

PDHC : B.000.000.000

PDHC : B.000.000.000

: 000.000.000

: 000.000.000

Cell 1

PDHC : B.022.002.003 - Active

PDHC : B.022.002.003

IPF_FW : 004.080.000 - Active

IPF_FW : 004.080.000

Cell 2 - not installed

PDHC : B.000.000.000

PDHC : B.000.000.000

: 000.000.000

: 000.000.000

Cell 3

PDHC : B.022.002.003 - Active

PDHC : B.022.002.003

IPF_FW : 004.080.000 - Active

IPF_FW : 004.080.000





IO Cabinet FPGA and Firmware revision report



PROGRAMMABLE HARDWARE :



System Backplane : GPM EMMUX

----------- -----------

001.001.000 001.000.000



IO Backplane : IO_LPM-0 IO_LPM-1

----------- -----------

001.001.001 001.001.001



Core IO : CIO-0 CIO-1

----------- -----------

001.002.000 001.002.000

FIRMWARE:



Core IO

MP-0 : B.001.003.004

ED-0 : 002.001.000

MP-1 : B.001.003.004

ED-1 : 002.001.000





[kona] MP:CM>

[kona] MP:CM> tc



This command TOCs the selected partition.



WARNING: Execution of this command irrecoverably halts all system

processing and I/O activity and restarts the selected

partition.





Part# Name

----- ----

0) kona_npar0

1) kona_npar1



Select a partition number: 0



Do you want to TOC partition number 0? (Y/[N]) n



-> The selected partition will NOT be TOCed.

[kona] MP:CM>

[kona] MP:CM> te



Enter message to broadcast (must be less than 80 characters).

q

[kona] MP:CM>

[Vamsidin]

Hi,

If u require any other info regd. this then post ur dowts else request you to close the thread...

Cases/Tickets are Opened and should be closed...

Regards,
Mohan