Reset GSP

[j773303]

How to reset the GSP?
I have try the stty +resetGSP < /dev/GSPdiag1.
But it is not work properly.

My machine is rp7410.

[Michael Tully]

The first thing I would be looking at here, if it does not work (the reset) is the level of the GSP firmware itself.

Here is one way to check if the reset was successful.

# stty +queryGSP < /dev/GSPdiag1

Only other course of action in this case as far as I know is a system reboot.

[Punithan]

Hi guy
i am also have the same problem and i am try with this......
#stty +resetGSP
verify the status using
#stty +queryGSP < /dev/GSPdiag1
and it was working fine after that....

bye....

[RAC_1]

Check the firmware. Also check stty +queryGSP < /dev/GSPdiag1

Other way is a reboot of machine.

[Fragon]

Hi, please pay attention that:
1. It must be root to run stty command to reset the GSP setting;
2. You must run this command in the console.(Telnet or X-simulator take no effect at all.)

Good luck!
-ux

[j773303]

while I try stty +queryGSP < /dev/GSPdiag1,
It's seems not work, the console shows the "the operation is not permitted". What happend on it?

[Caesar_3]

Hello!

You have a reset button on the GSP card
that if you will press it card will reset,
the button is on the card in the server and
if you will look from the side of server, where
is the slot you will see a white button

Caesar