HPE 9000 and HPE e3000 Servers
1747984 Members
4315 Online
108756 Solutions
New Discussion юеВ

RP8420 MP Processor reset

 
Kumaresh P N
Occasional Contributor

RP8420 MP Processor reset

Hi HP-UX gurus,

Can you guys please help in resetting the password for MP Processor ?
6 REPLIES 6
Adisuria Wangsadinata_1
Honored Contributor

Re: RP8420 MP Processor reset

Hi,

You can use the HP-UX command below to reset the password for MP :

# stty +resetGSP
NOTE : maybe GSPdiag2, check on ioscan

From GSP :

ctrl-b to reach GSP
GSP> xd -> r

Hope this information can help you.

Cheers,
AW
now working, next not working ... that's unix
Adisuria Wangsadinata_1
Honored Contributor

Re: RP8420 MP Processor reset

Hi,

The last source to reset the password for MP is by pressing MP reset button, but make sure you have the information of the IP for the MP.

Check the url below for the location (page 40) :

http://www.docs.hp.com/en/A6912-96008/A6912-96008.pdf

Hope this information can help you.

Cheers,
AW
now working, next not working ... that's unix
Mark Nieuwboer
Esteemed Contributor

Re: RP8420 MP Processor reset

The only way to reset a password of the MP.
Is go to the MP and hold down the reset button for at least 10 seconds.
After that the default values are in place.
This means also al your configurations are gone. like network.

grtz. Mark
Jayasuntar
Valued Contributor

Re: RP8420 MP Processor reset

Hi,

Reset the MP to load the default configuration with password of Admin

regards

Jay
Kumaresh P N
Occasional Contributor

Re: RP8420 MP Processor reset

Thanks a lot i did it
Kumaresh P N
Occasional Contributor

Re: RP8420 MP Processor reset

Done as per explained