System Board error? PS error? or other errors?

[Wang Haitao]

Hi all,

I have an rp3440, now the system LED flash red and cannot power on.

The SL has some entry like these:
Log Entry 487: 00:00:26
Alert Level 2: Informational
Keyword: Type-02 226f05 2256645
ACPI state S5 (soft-off)
Logged by: Baseboard Management Controller;
Sensor: System ACPI Power State - ACPI State
Data1: S5/G2 soft-off
0x200000001A022560 FFFF056FFA220300


Log Entry 486: 00:00:25
Alert Level 2: Informational
Keyword: Type-02 020600 132608
Voltage OK
Logged by: Baseboard Management Controller;
Sensor: Voltage - Battery Voltage
Data1: Performance Met
0x2000000019022550 FFFF0006D4020300


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 485: 00:00:25
Alert Level 2: Informational
Keyword: Type-02 090b00 592640
Power supply subsystem redundancy gained.
Logged by: Baseboard Management Controller;
Sensor: Power Unit - Power Redundancy
Data1: Redundancy Regained
0x2000000019022540 FFFF000B4F090300


Log Entry 484: 00:00:25
Alert Level 2: Informational
Keyword: Type-02 080900 526592
Power supply turned off
Logged by: Baseboard Management Controller;
Sensor: Power Supply - Pwr Spply 2 Ctrl
Data1: Device Disabled
0x2000000019022530 FFFF000945080300


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 483: 00:00:25
Alert Level 2: Informational
Keyword: Type-02 080900 526592
Power supply turned off
Logged by: Baseboard Management Controller;
Sensor: Power Supply - Pwr Spply 1 Ctrl
Data1: Device Disabled
0x2000000019022520 FFFF000944080300


Log Entry 482: 00:00:24
Alert Level 2: Informational
Keyword: Type-02 058301 361217
Chassis door closed
Logged by: Baseboard Management Controller;
Sensor: Physical Security - Chassis Open
Data1: State Asserted (Deassertion)
0x2000000018022510 FFFF018302050300


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 481: 00:00:24
Alert Level 2: Informational
Keyword: Type-02 05ef00 388864
Chassis intrusion reset
Logged by: Baseboard Management Controller;
Sensor: Physical Security - Chassis Intrus
Data1: General Chassis Intrusion (Deassertion)
0x2000000018022500 FFFF00EF01050300


Log Entry 480: 00:00:19
Alert Level 2: Informational
Keyword: MP_SELFTEST_RESULT
Management Processor Firmware Selftest Result
Logged by: Management Processor 0
Data: Reset type and cause - Cold reset
0x5E800A7A00E024E0 0000000000000000


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 479: 00:00:18
Alert Level 7: Fatal
Keyword: Type-02 020706 132870
Voltage Fault
Logged by: Baseboard Management Controller;
Sensor: Voltage - Power Good
Data1: transition to Non-recoverable
0x20000000120224D0 00000607D6020300


Log Entry 478: 00:00:02
Alert Level 2: Informational
Keyword: Type-02 127003 1208323
Chassis Control request to BMC via IPMI or sensor
Logged by: Baseboard Management Controller;
Sensor: System Event
Data2: OEM Code2: 0x1F
0x20000000020224C0 1F81A37000120300


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 477: 00:00:02
Alert Level 2: Informational
Keyword: Type-02 090b00 592640
Power supply subsystem redundancy gained.
Logged by: Baseboard Management Controller;
Sensor: Power Unit - Power Redundancy
Data1: Redundancy Regained
0x20000000020224B0 FFFF000B4F090300


Log Entry 476: 00:00:02
Alert Level 2: Informational
Keyword: Type-02 127001 1208321
BMC firmware initializing
Logged by: Baseboard Management Controller;
Sensor: System Event
Data2: OEM Code2: 0x34
0x20000000020224A0 3402A17000120300

...

Log Entry 437: 17 Apr 2009 01:39:09
Alert Level 5: Critical
Keyword: Type-02 020703 132867
Voltage reached critical level
Logged by: Baseboard Management Controller;
Sensor: Voltage - 12V Pwr Supply 2
Data1: transition to Non-recoverable from less severe
0x2049E7DDBD022210 FFFF0307CE020300


Log Entry 436: 17 Apr 2009 01:39:09
Alert Level 5: Critical
Keyword: Type-02 020703 132867
Voltage reached critical level
Logged by: Baseboard Management Controller;
Sensor: Voltage - 12V Pwr Supply 1
Data1: transition to Non-recoverable from less severe
0x2049E7DDBD022200 FFFF0307CD020300



The whole system event log pls see the attachment.

Does the PSes error? but if both PSes were bad,I should cannot access the MP.

I search the forum, these two threads more like the current situation:
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1239970076551+28353475&threadId=1111736
http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1240191281586+28353475&threadId=1320610

So, maybe the processor 1 has some problem? because i could not see it from the df command. Or the system board bad?

TIA

Best regards,

[Wang Haitao]

Sorry, the system has only one PA8800 processor.

[Wang Haitao]

hello all,

The problem has resolved! One of the PSes is bad maybe shorted circuit, unpluged it the system has powered on. when plugged into again, the PS was smoking.