Terminal Console

[Marcin_10]

I have to disconnect Console (UPS) and after put it back my terminal is not responding (there is not log in prompt) I have to use remode computer to acces server. There is blining cursor and 8 selecton at the buttom start with Line/mode Modify/all Block/mode

I understend that I have reset Terminal Console what option I have to set in order to get to login option

Please help

[Patrick Wallek]

First thing is to make sure that the Block Mode box has a * in it. If not, press F4, I think, to make it have a * and then try again.

[Eugeny Brychkov]

I think Patrick meant 'REMOTE' mode. It should be marked with '*'. Finally, you can reset terminal completely by powering it off, then pressing and holding 'd' key, then turning terminal on and wait until it beeps and then release 'd' key and press enter key to confirm reset to defaults
Eugeny

[Patrick Wallek]

You are correct Eugeny. Thanks for catching my mistake.

[Suresh Patoria]

Hi,

Just check the connection

If all things ok

then try Ctrl+d or Ctrl +b