HPE Community
HPE 9000 and HPE e3000 Servers
1826349 Members
3738 Online
109692 Solutions
New Discussion

Re: V-class 1000Base-t ethernet

 
James Lee Clukey
New Member

‎11-19-2009 11:22 AM

‎11-19-2009 11:22 AM

V-class 1000Base-t ethernet

Customer requests info 1000base-t PCI card for V-class 2500 running 11.0. Is A6825A a good recommendation.
0 Kudos
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎11-19-2009 11:41 AM

‎11-19-2009 11:41 AM

Re: V-class 1000Base-t ethernet

IMHO every card with a 11.00 driver. Since this is not supported, it might be difficult to get this information and/or driver.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
rick jones
Honored Contributor

‎11-19-2009 04:48 PM

‎11-19-2009 04:48 PM

Re: V-class 1000Base-t ethernet

For the sake of the archives...

It isn't clear (to me anyway) that the A6825A was ever "supported" on the V-Class. It is at least PCI, not PCI-X so there is some hope, but I cannot recall if the A6825A was a "universal" PCI card (both 5.0 and 3.3v) or if it was 3.3v only. Nor can I recall if the V-class offered any 3.3v slots :) "Back when" I was doing SPECweb96 benchmarks on the V2250, we used the A4926A:

http://www.spec.org/osg/web96/results/res98q3/web96-980904-03033.html

The card was an IHU (Independent Hardware Unit) so I suspect but cannot confirm that the driver would not have been in the 11.0 OS media. Probably it would have been on a separate DART.
there is no rest for the wicked yet the virtuous have no pillows
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.