HPE Community
HPE 9000 and HPE e3000 Servers
1821649 Members
3018 Online
109633 Solutions
New Discussion юеВ

Wyse/vt100 terminal on HP9000

 
SOLVED
Go to solution
Jeff Pendleton
Occasional Contributor

тАО06-05-2000 08:32 AM

тАО06-05-2000 08:32 AM

Wyse/vt100 terminal on HP9000

Charles McCane wrote:

What is the problem with using a WY-150 terminal set to vt100 emulation connected to the serial port of an HP9000? I'm trying to install HP/UX on a 735 using a WY-150 as the console. Everything works ok during the boot selection process (terminal responds, screen looks great) but once the HP/UX cdrom kicks off, the terminal keyboard no longer works. What's up?
an expert is a person who has made all the mistakes which can be made, in a narrow field.├н┬╣тАЪ├н┬░┬н- Niels Bohr (1885-1962)
0 Kudos
2 REPLIES 2
Scott D. Allen
Regular Advisor

тАО06-06-2000 12:03 PM

тАО06-06-2000 12:03 PM

Re: Wyse/vt100 terminal on HP9000

I think that there might be an issue with the D class and terminals connected to the console port. I recently had a similar problem connecting a console to my D270. It didn't work until I hooked up my HP 700/92 terminal. I think it is looking for an HPTerm terminal type. If you have that on the WYSE, you might try that, otherwise try picking up an HP terminal (cheesy).

--Scott
"Sometimes the devil you know is better than the devil you don't know."
0 Kudos
Jennifer Chiarelli
Regular Advisor

тАО06-07-2000 02:41 PM

тАО06-07-2000 02:41 PM

Solution

Re: Wyse/vt100 terminal on HP9000

A 735 workstation requires a HP terminal connected with a BNC cable. We use a A2094A monitor connected with a 98700-61603 cable.
It's a binary world!
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.