2910al-48G: SNMP Trap-level critical

[JesperP]

Hi,

I have a hard time finding any documentation for the HP 2910's regarding this command:

Switch(config)# snmp-server host 10.10.10.10 trap-level critical

now this command, as I understand it, will send "Critical" level event log entries as an SNMP trap to the configured SNMP host.

However, the event log(show logging) has no "critical" level, but has the Warning, Major, Error, Informational and Debug categories.

I have also not found any docúmentation specifically for the 2910's with a list of what errors is classified as what type of entry in the event log.

So, I'm wondering. Does anyone know what the "Critical" trap-level actually sends from the Event log? Major, Warning and Error events?

Thanks

Jesper