After upgrade J9447A to version K.15.13.003 - Transceiver type not support

[Helio_1]

Hello, the my name is Hélio Viegas and is the first time i come to forum.

I bring a problem since i did a upgrade on "Switch ZL5406", the module "HP 20-port 10/100/1000 PoE+ / 4-port Mini-GBIC zl Module" with a "HP 10GB SR SFP+ Optical Transceiver 455885-001 456096-001 455883-B21 GBIC" are rejected.

In log's switch "Port contains a transceiver that is not supported in thi port".

Version before upgrade was 14.92, now it's K.15.13.0003, ROM K.15.30.

Like the information if not have the BootROM K.12.17 the BootROM will be updated with this K.15.13.0003.

thank.

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based.
-HP Forum Moderator

[Vince_Whirlwind]

The 4 SFP ports in the J9447 module take 1Gb SFPs.

For 10Gb SFP+s, you need a J9536 (20x GT + 2x SFP+) or an 8-port SFP+ module.

[Mik-HPN]

Optical Transceivers 455885-001,  456096-001 and 455883-B21 are not supported in HPN devices at all. 

[Helio_1]

I have two modules of J9309A HP ProCurve 4-Port 10GbE SFP+ zl Module
would do perform?

HViegas

Thank

[Mik-HPN · Accepted solution]

The J9309A HP ProCurve 4-Port 10GbE SFP+ zl module will accept 10 GbE HPN transceivers, however still not the 455885-001, 456096-001 or 455883-B21.

The transceivers supported in that module are:

SFP+

J9150A SR (300m)

J9152A LRM (220m)

J9151A LR (10km)

J9153A ER (40km)

DAC (SFP+ to SFP+)

J9281A 1meter

J9281B 1meter

J9283A 3 meter

J9283B 3 meter

J9285A 7 meter

J9285B 7 meter

J9286B 10 meter

J9287B 15 meter

DAC (XFP to SFP+)

J9300A 1meter

J9301A 3 meter

J9302A 5 meter

[Helio_1]

Thanks for your help, i don't want believe before i upgrade zL5406 transceiver worked and  now i have 10 transceiver installed in "Switch 2610-24/12PWR (J9086A)" if do a upgrade will do the same problem. I think that best to downgrade ZL5406.
Thanks.