Aruba 5406R zl2 Switch SNMP Values

[HighCoder]

Hello,

has anyone out there the OIDs for the SNMP GET Command for

- Power Supplies

- Fans

- Temperatures

- OverHeat

specially for the Aruba 5406R zl2 switch

I've tested almost all OIDs I can find in google but none of them worked for the 5406R zl2

I would be very happy about an answer

[HighCoder]

If anyone needs the OID for the fans: I found it:

.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4

0 = Failed

1 = Removed

2 = Off

3 = Underspeed

4 = Overspeed

5 = OK

6 = Maxstate

[epytir]

For anyone who is searching for the temperature table

.1.3.6.1.4.1.11.2.14.11.1.2.8.1

or with the mib

HP-ICF-CHASSIS::hpSystemAirTempTable

Thats the result with mib installed:

HP-ICF-CHASSIS::hpSystemAirName.0 = STRING: "Chassis"
HP-ICF-CHASSIS::hpSystemAirCurrentTemp.0 = STRING: "XC"
HP-ICF-CHASSIS::hpSystemAirMaxTemp.0 = STRING: "XC"
HP-ICF-CHASSIS::hpSystemAirMinTemp.0 = STRING: "XC"
HP-ICF-CHASSIS::hpSystemAirOverTemp.0 = INTEGER: no(2)
HP-ICF-CHASSIS::hpSystemAirThresholdTemp.0 = STRING: "XC"
HP-ICF-CHASSIS::hpSystemAirEntPhysicalIndex.0 = INTEGER: X

Greetings

Epytir

[kkrumm1]

Anybody have OID for Power supply.

[HighCoder]

The OID for the power supplies is: .1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2

If you do a snmpwalk on it it returns something like this:

iso.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2.1 = INTEGER: 3
iso.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2.2 = INTEGER: 3

These are the states of a power supply:

1: NotPresent
2: NotPlugged
3: Powered
4: Failed
5: PermFailure
6: Max
7: AuxFailure
8: NotPowered
9: AuxNotPowered

So what this means in this example is:

Power Supply 1 and 2 are powered.

I hope I could help you

[HighCoder · Accepted solution]

For anyone who wants to get the status of the management modules it's the OID: .1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.1

A snmpwalk on this returns something like this:

iso.3.6.1.4.1.11.2.14.11.1.11.2.5.1.1.69 = INTEGER: 3
iso.3.6.1.4.1.11.2.14.11.1.11.2.5.1.1.70 = INTEGER: 4

The states are:

1: unknown
2: hotStandby
3: coldStandby
4: providingService

So it means that the second management module is providingservice (active) and the first one is in cold standby

[monitorjunkie]

Hello

 does anyone know the correct meaning of the possible states, that returns a snmpwalk for the power supplies OID: .1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2:

 1: psNotPresent

2: psNotPlugged

3: psPowered

4: psFailed

5: psPermFailure

6: psMax

7: psAuxFailure

8: psNotPowered

9: psAuxNotPowered

 Every one of the 9 states needs to be referred as one of 4 monitoring check states (0: OK, 1: WARNING, 2: CRITICAL, 3: UNKNOWN)

So far, only the reference to number "3: psPowered" is known exactly as "0: OK"

Thank You

[HighCoder]

Hello,

we treat it like this:

NotPresent -> Warning

NotPlugged -> Warning

Failed -> Critical

PermFailure -> Critical

Max -> Warning

AuxFailure -> Warning

NotPowered -> Warning

AuxNotPowered -> Warning

I hope I could help you.