Cant connect the FlexFabric 5700 with the Aruba 2530 poe+: Remote access HPE FlexFabric 5700

[cvanaxel]

Hi All,

Is it possible to change the remote access from the HPE flexfabric 5700. The only part i can find is to use the vlan 1 or the M-port. I dont want that. I want to add my own manage vlan to the switch. Because it will be part of a manage switch enviroment.

i did something like this.

interface Vlan-interface vlan 311

ip address 10.0.1.1 255.255.255.0

ip route-static 0.0.0.0 0 10.0.1.254

interface Ten-GigabitEthernet1/0/31
 port link-type trunk
 port trunk permit vlan all

[cvanaxel]

I cant seem to connect the FlexFabric 5700 with the Aruba 2530 poe+.

conf Arube switch.

hostname "blabla"
trunk 1-5 trk1 lacp
trunk 45-46 trk2 trunk
trunk 47-48 trk3 lacp
trunk 51 trk4 trunk
trunk 10 trk5 trunk
trunk 43 trk6 trunk
trunk 44 trk7 trunk
trunk 41 trk8 trunk
trunk 42 trk9 trunk
trunk 52 trk10 trunk
trunk 11 trk11 trunk

timesync sntp
sntp unicast
sntp server priority 1 10.1.5.254
no telnet-server
time daylight-time-rule western-europe
time timezone 60
ip default-gateway 10.1.1.254
interface 1
   exit
interface 2
   exit
interface 3
   exit
interface 4
   exit
interface 5
   exit
interface 6
   exit
interface 7
   exit
interface 8
   exit
interface 9
   exit
interface 10
   exit
interface 11
   name "Storage.1 DOWN"
   exit
interface 14
   exit
interface 41
   exit
interface 42
   exit
interface 43
   exit
interface 44
   exit
interface 45
   exit
interface 46
   exit
interface 47
   exit
interface 48
   exit
interface 51
   exit
interface 52
   exit
snmp-server community "public" unrestricted
vlan 1
   name "DEFAULT_VLAN"
   no untagged 7-9,13-15,35,Trk1-Trk10
   untagged 6,12,16-34,36-40,49-50,Trk11
   ip address dhcp-bootp
   exit
vlan 5
   tagged Trk1-Trk11
   no ip address
   exit
vlan 111
   untagged 7
   tagged Trk1-Trk11
   no ip address
   voice
   exit
vlan 2123
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3111
   name "switchvlan"
   tagged Trk1-Trk11
   ip address 10.1.1.1 255.255.255.0
   exit
vlan 3112
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3113
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3114
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3115
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3116
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3117
   untagged 9
   tagged Trk1-Trk11
   ip address 10.1.22.25 255.255.255.0
   exit
vlan 3118
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3119
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3120
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3121
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3122
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3123
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3124
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3125
   untagged 8
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3126
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3127
   untagged 35
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3128
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3129
   tagged Trk1-Trk11
   no ip address
   exit
vlan 3147
   untagged 14-15
   tagged Trk1-Trk11
   no ip address
   exit
spanning-tree Trk1 priority 0
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4
spanning-tree Trk4 priority 4
spanning-tree Trk5 priority 4
spanning-tree Trk6 priority 4
spanning-tree Trk7 priority 4
spanning-tree Trk8 priority 4
spanning-tree Trk9 priority 4
spanning-tree Trk10 priority 4
spanning-tree Trk11 priority 4
no tftp server
no dhcp config-file-update
no dhcp image-file-update
no dhcp tr69-acs-url
password manager
password operator

conf FlexFabric 5700
#
 version 7.1.045, Release 2432P01
#
 sysname blabla2
#
 clock timezone Amman add 02:00:00
 clock protocol ntp
#
 telnet server enable
#
 irf mac-address persistent timer
 irf auto-update enable
 undo irf link-delay
 irf member 1 priority 1
 irf mode normal
#
 ip unreachables enable
 ip ttl-expires enable
#
 lldp global enable
#
 system-working-mode StandardBridge
 password-recovery enable
#
vlan 1
#
vlan 3111
 name "switch vlan"
#
vlan 3114
#
vlan 3116 to 3117
#
vlan 3120 to 3122
#
 stp global enable
#
interface NULL0
#
interface Vlan-interface3111
 ip address 10.1.1.199 255.255.255.0
#
interface FortyGigE1/0/41
#
interface FortyGigE1/0/42
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/1
 description Trunk UP blabla port 11
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 3111 3114 3116 to 3117
#
interface Ten-GigabitEthernet1/0/2
 description Trunk UP RSW.1 port 12
#
interface Ten-GigabitEthernet1/0/3
#
interface Ten-GigabitEthernet1/0/4
#
interface Ten-GigabitEthernet1/0/5
#
interface Ten-GigabitEthernet1/0/6
#
interface Ten-GigabitEthernet1/0/7
#
interface Ten-GigabitEthernet1/0/8
#
interface Ten-GigabitEthernet1/0/9
#
interface Ten-GigabitEthernet1/0/10
#
interface Ten-GigabitEthernet1/0/11
#
interface Ten-GigabitEthernet1/0/12
#
interface Ten-GigabitEthernet1/0/13
#
interface Ten-GigabitEthernet1/0/14
#
interface Ten-GigabitEthernet1/0/15
 port access vlan 3117
#
interface Ten-GigabitEthernet1/0/16
#
interface Ten-GigabitEthernet1/0/17
 port access vlan 3117
#
interface Ten-GigabitEthernet1/0/18
#
interface Ten-GigabitEthernet1/0/19
#
interface Ten-GigabitEthernet1/0/20
#
interface Ten-GigabitEthernet1/0/21
#
interface Ten-GigabitEthernet1/0/22
#
interface Ten-GigabitEthernet1/0/23
#
interface Ten-GigabitEthernet1/0/24
#
interface Ten-GigabitEthernet1/0/25
#
interface Ten-GigabitEthernet1/0/26
#
interface Ten-GigabitEthernet1/0/27
#
interface Ten-GigabitEthernet1/0/28
#
interface Ten-GigabitEthernet1/0/29
#
interface Ten-GigabitEthernet1/0/30
#
interface Ten-GigabitEthernet1/0/31
#
interface Ten-GigabitEthernet1/0/32
#
interface Ten-GigabitEthernet1/0/33
#
interface Ten-GigabitEthernet1/0/34
#
interface Ten-GigabitEthernet1/0/35
#
interface Ten-GigabitEthernet1/0/36
#
interface Ten-GigabitEthernet1/0/37
#
interface Ten-GigabitEthernet1/0/38
#
interface Ten-GigabitEthernet1/0/39
#
interface Ten-GigabitEthernet1/0/40
#
 scheduler logfile size 16
#
line class aux
 user-role network-admin
#
line class vty
 authentication-mode scheme
 user-role network-admin
 user-role network-operator
 set authentication password hash 
 protocol inbound ssh
 idle-timeout 30 0
#
line aux 0
 user-role network-admin
#
line vty 0 63
 user-role network-operator
#
 ip route-static 0.0.0.0 0 10.1.1.254
#
 ssh server enable
#
 ntp-service enable
 ntp-service source M-GigabitEthernet0/0/0
 ntp-service unicast-server 10.1.10.9
#
radius scheme system
 user-name-format without-domain
#
domain system
#
 aaa session-limit telnet 1
 aaa session-limit ssh 1
 domain default enable system
#
role name level-0
 description Predefined level-0 role
#
role name level-1
 description Predefined level-1 role
#
role name level-2
 description Predefined level-2 role
#
role name level-3
 description Predefined level-3 role
#
role name level-4
 description Predefined level-4 role
#
role name level-5
 description Predefined level-5 role
#
role name level-6
 description Predefined level-6 role
#
role name level-7
 description Predefined level-7 role
#
role name level-8
 description Predefined level-8 role
#
role name level-9
 description Predefined level-9 role
#
role name level-10
 description Predefined level-10 role
#
role name level-11
 description Predefined level-11 role
#
role name level-12
 description Predefined level-12 role
#
role name level-13
 description Predefined level-13 role
#
role name level-14
 description Predefined level-14 role
#
user-group system
#
local-user admin class manage
 password hash 
 service-type ssh http https
 authorization-attribute user-role network-admin
 authorization-attribute user-role network-operator
#
 ip http enable
 ip https enable
 web idle-timeout 600
#
return

I cant ping them and on the switches they both cant ping.  Can anyone please help me out?

[cvanaxel]

i tried this and still did not work. What is wrong.

HPE Flexfabric 5700

vlan 3111
 name "switch vlan"
#
 stp global enable
#
interface Bridge-Aggregation1
 port link-type trunk
 port trunk permit vlan all
 port trunk pvid vlan 3111
 link-aggregation mode dynamic
#
interface NULL0
#
interface Vlan-interface3111
 ip address 10.1.1.199 255.255.255.0
#
interface FortyGigE1/0/41
#
interface FortyGigE1/0/42
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/1
 port link-type trunk
 port trunk permit vlan all
 port trunk pvid vlan 3111
 port link-aggregation group 1

And on the procuve trk11 is untagged. But still i cant ping them.

[bala5]

Hi,

1.is there any reachability between the devices ? If No 

2.Check the vlan is allowed on the trunk ports. If Yes

3.Check the port are tagged properly .

[aybra]

Hello,

Just to clarify one thing, trunk for Aruba-OS means aggregation for HPE OS,.

1- In the first configurations you have configured Aruba as trunk (agg) and the 5700 normal link:

Aruba :

trunk 11 trk11 trunk

vlan 3111
   name "switchvlan"
   tagged Trk1-Trk11
   ip address 10.1.1.1 255.255.255.0
   exit

5700:

interface Ten-GigabitEthernet1/0/1
 description Trunk UP blabla port 11
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 3111 3114 3116 to 3117
#

2- In the second configuration you have configured trunk (static agg) on Aruba but dynamic aggregation on 5700.

5700

interface Bridge-Aggregation1
 port link-type trunk
 port trunk permit vlan all
 port trunk pvid vlan 3111
 link-aggregation mode dynamic

#

Aruba

trunk 11 trk11 trunk
3 - i recommend to use the following configurations

5700 :

interface Ten-GigabitEthernet1/0/1
 description Trunk UP blabla port 11
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 3111 3114 3116 to 3117
#

Aruba

remove trunk 11

and change vlan configuration :

vlan 3111
   name "switchvlan"
   tagged Trk1-Trk10, 11
   ip address 10.1.1.1 255.255.255.0
   exit

4- if you want to use agg we recommend the follwing configurations 

5700

interface Bridge-Aggregation1
port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 3111 3114 3116 to 3117
 link-aggregation mode dynamic
#

Aruba

trunk 11 trk11  lacp

vlan 3111
   name "switchvlan"
   tagged Trk1-Trk11
   ip address 10.1.1.1 255.255.255.0
   exit

Finally hope this can help you.

best regards

[cvanaxel]

I tried that also. No connection

interface Bridge-Aggregation1
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 2 to 4094
 link-aggregation mode dynamic
#
interface NULL0
#
interface Vlan-interface3111
 ip address 10.1.1.199 255.255.255.0
#
interface FortyGigE1/0/41
#
interface FortyGigE1/0/42
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/1
 description Trunk UP RSW.1 port 11
 port link-aggregation group 1

Aruba

trunk 11 trk11 lacp

vlan 3111
   name "switchvlan"
   tagged Trk1-Trk11
   ip address 10.1.1.1 255.255.255.0
   exit

Errors i get.

[5700]%Oct 10 10:08:49:293 2018 5700 IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is down.
%Oct 10 10:08:49:311 2018 5700 LAGG/6/LAGG_INACTIVE_AICFG: Member port XGE1/0/1 of aggregation group BAGG1 changed to the inactive state, because the member po.
%Oct 10 10:09:03:456 2018 5700 DEV/1/FAN_DIRECTION_NOT_PREFERRED: Fan 1 airflow direction is not preferred on slot 1, please check it.
%Oct 10 10:09:03:457 2018 5700 DEV/1/FAN_DIRECTION_NOT_PREFERRED: Fan 2 airflow direction is not preferred on slot 1, please check it.
%Oct 10 10:09:08:840 2018 5700 LLDP/5/LLDP_PVID_INCONSISTENT: PVID mismatch discovered on Ten-GigabitEthernet1/0/1 (PVID 1), with RSW.1 11 (PVID 3111).

[5700]ping 10.161.1.1
Ping 10.1.1.1 (10.1.1.1): 56 data bytes, press CTRL_C to break
Request time out
Request time out
Request time out
Request time out
%Oct 10 10:09:38:841 2018 5700 LLDP/5/LLDP_PVID_INCONSISTENT: PVID mismatch discovered on Ten-GigabitEthernet1/0/1 (PVID 1), with Aruba 11 (PVID 3111).

[aybra]

Hello  cvanaxel 

Can you please post the complete configuration of the two switches ?

best regards

[cvanaxel]

I added them as txt file.

Download

[aybra]

Hello ,

you have to correct the Aruba configuration as follow :

vlan 1
name "DEFAULT_VLAN"
no untagged 7-9,13-15,35,Trk1-Trk10
untagged 6,12,16-34,36-40,49-50,Trk11
ip address dhcp-bootp
exit

vlan 3111
name "switch3111"
tagged Trk1-Trk11
ip address 10.161.1.1 255.255.255.0
exit

[cvanaxel]

I did that. Stll no result.

vlan 1
   name "DEFAULT_VLAN"
   no untagged 7-9,13-15,35,Trk1-Trk10
   untagged 6,12,16-34,36-40,49-50,Trk11
   ip address dhcp-bootp
   exit

vlan 3111
   name "switch3111"
   tagged Trk1-Trk11
   ip address 10.161.1.1 255.255.255.0
   exit

ping from the Aruba to 5700

Request timed out.

[aybra]

Hello

can you provide the last configurations and the output of the commands :

Aruba :

display port trunk

show trunk

show lacp

5700:

display port trunk

display link-aggregation verbose

[cvanaxel]

Aruba

display port trunk (did not show anything)

sh trunks

  Port | Name                             Type       | Group Type
  ---- + -------------------------------- ---------- + ----- --------
  1    | UP MaNZA                         100/1000T  | Trk1  LACP
  2    | UP MaNZA                         100/1000T  | Trk1  LACP
  3    | UP MaNZA                         100/1000T  | Trk1  LACP
  4    | UP MaNZA                         100/1000T  | Trk1  LACP
  5    | UP MaNZA                         100/1000T  | Trk1  LACP
  10   | DOWN.8 kamer laptops-srfaces ... 100/1000T  | Trk5  Trunk
  11   | StorageRSW.1 DOWN                100/1000T  | Trk11 LACP
  41   | Tijdelijk naar RSW laatste sw... 100/1000T  | Trk8  Trunk
  42   | Tijdelijk naar RSW op de gron... 100/1000T  | Trk9  Trunk
  43   | Tijdelijk naar RSW.10            100/1000T  | Trk6  Trunk
  44   | Tijdelijk naar RSW.2             100/1000T  | Trk7  Trunk
  45   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  46   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  47   | wifi                             100/1000T  | Trk3  LACP
  48   | wifi                             100/1000T  | Trk3  LACP
  51   | B vleugel                        1000SX     | Trk4  Trunk
  52   | B vleugel                        1000LX     | Trk10 Trunk

sh lacp

                                    LACP

           LACP      Trunk     Port                LACP      Admin   Oper
   Port    Enabled   Group     Status    Partner   Status    Key     Key
   -----   -------   -------   -------   -------   -------   ------  ------
   1       Active    Trk1      Up        Yes       Success   0       54
   2       Active    Trk1      Up        Yes       Success   0       54
   3       Active    Trk1      Up        Yes       Success   0       54
   4       Active    Trk1      Up        Yes       Success   0       54
   5       Active    Trk1      Up        Yes       Success   0       54
   11      Active    Trk11     Blocked   Yes       Failure   0       64
   47      Active    Trk3      Up        Yes       Success   0       56
   48      Active    Trk3      Up        Yes       Success   0       56

5700

display port trunk

Interface             PVID    VLAN Passing
BAGG1                 1        3111, 3114, 3116-3117, 3120-3122

display link-aggr verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected,
             I -- Individual, * -- Management port
Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
Management VLAN : None
System ID: 0x8000, d894-0390-1224
Local:
  Port             Status  Priority Oper-Key  Flag
--------------------------------------------------------------------------------
  XGE1/0/1         U       32768    1         {A}
Remote:
  Actor            Partner Priority Oper-Key  SystemID               Flag
--------------------------------------------------------------------------------
  XGE1/0/1         11      0        64        0xc40 , e007-1b2c-0c40 {ACEF}

[aybra]

Hello

Please fllowup these steps order :

1- under interface Ten-GigabitEthernet1/0/1 type command :  port link-aggregation group 1

2- under interface Bridge-Aggregation1 type commands :

port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 4094

3- if it doesn't work please provide the output of the same commands as the previous answer.

best regards

[BjKo]

Hi,

why do you have static trunks configured on the 2530? 
Please note that a "trunk" in HP/Aruba language is a link-aggregation and not a tagged port (like f.e. in Cisco language).

You have several trunks with only one member, which is unnecessary. You should undo the trunk config on these ports:
trunk 51 trk4 trunk
trunk 10 trk5 trunk
trunk 43 trk6 trunk
trunk 44 trk7 trunk
trunk 41 trk8 trunk
trunk 42 trk9 trunk
trunk 52 trk10 trunk
trunk 11 trk11 trunk

Why are you using static trunks instead of LACP? LACP will help you when you have a faulty cable. 

You need to change the 5700 config to also be a link-aggregation when you connect it to a link-aggregation.
On the 5700 a "trunk" is a port with tagged VLANs and not a link-aggregation.
To create a new LACP link-aggregation do the following on the 5700:

system-view
interface Bridge-aggregation 10
quit
interface ten 1/0/31
port link-aggregation group 10
quit
interface ten 1/0/32
port link-aggregation group 10
quit
interface bridge 10
port link-type trunk
port trunk perm vlan all
 link-aggregation mode dynamic
description To-Aruba-2530
quit
save f

On Aruba do this:
conf 
trunk 31,32 trk15
interface trk15
tagged vlan 1,10,15,3011,....... 
exit
wr mem

Make sure there is no prior config on these ports.

Then connect ports 31-1/0/31 and 32-1/0/32 and it should work.

[cvanaxel]

i did what you asked same result.

interface Bridge-Aggregation1
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 2 to 4094
 link-aggregation mode dynamic
#
interface NULL0
#
interface Vlan-interface3111
 ip address 10.161.1.199 255.255.255.0
#
interface FortyGigE1/0/41
#
interface FortyGigE1/0/42
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/1
 description Trunk UP RSW.1 port 11
 port link-aggregation group 1

Output:

Aruba

RSW.1# display port trunk
RSW.1# sh trunks

 Load Balancing Method:  L3-based (default)

  Port | Name                             Type       | Group Type
  ---- + -------------------------------- ---------- + ----- --------
  1    | UP MaNZA                         100/1000T  | Trk1  LACP
  2    | UP MaNZA                         100/1000T  | Trk1  LACP
  3    | UP MaNZA                         100/1000T  | Trk1  LACP
  4    | UP MaNZA                         100/1000T  | Trk1  LACP
  5    | UP MaNZA                         100/1000T  | Trk1  LACP
  10   | DOWN.8 kamer laptops-srfaces ... 100/1000T  | Trk5  Trunk
  11   | StorageRSW.1 DOWN                100/1000T  | Trk11 LACP
  41   | Tijdelijk naar RSW laatste sw... 100/1000T  | Trk8  Trunk
  42   | Tijdelijk naar RSW op de gron... 100/1000T  | Trk9  Trunk
  43   | Tijdelijk naar RSW.10            100/1000T  | Trk6  Trunk
  44   | Tijdelijk naar RSW.2             100/1000T  | Trk7  Trunk
  45   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  46   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  47   | wifi                             100/1000T  | Trk3  LACP
  48   | wifi                             100/1000T  | Trk3  LACP
  51   | B vleugel                        1000SX     | Trk4  Trunk
  52   | B vleugel                        1000LX     | Trk10 Trunk

RSW.1# sh lacp

                                    LACP

           LACP      Trunk     Port                LACP      Admin   Oper
   Port    Enabled   Group     Status    Partner   Status    Key     Key
   -----   -------   -------   -------   -------   -------   ------  ------
   1       Active    Trk1      Up        Yes       Success   0       54
   2       Active    Trk1      Up        Yes       Success   0       54
   3       Active    Trk1      Up        Yes       Success   0       54
   4       Active    Trk1      Up        Yes       Success   0       54
   5       Active    Trk1      Up        Yes       Success   0       54
   11      Active    Trk11     Blocked   Yes       Failure   0       64
   47      Active    Trk3      Up        Yes       Success   0       56
   48      Active    Trk3      Up        Yes       Success   0       56

5700

display port trunk

Interface             PVID    VLAN Passing
BAGG1                 1        3111, 3114, 3116-3117, 3120-3122
XGE1/0/1              1       None

[StorageRSW.1]display link-aggregation verbose
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected,
             I -- Individual, * -- Management port
Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
Management VLAN : None
System ID: 0x8000, d894-0390-1224
Local:
  Port             Status  Priority Oper-Key  Flag
--------------------------------------------------------------------------------
  XGE1/0/1         U       32768    1         {A}
Remote:
  Actor            Partner Priority Oper-Key  SystemID               Flag
--------------------------------------------------------------------------------
  XGE1/0/1         11      0        64        0xc40 , e007-1b2c-0c40 {ACEF}

still same problem

[aybra]

Hello

the agg config doesn't match the port one, so please do the following commands in this order :

undo interface Bridge-Aggregation1

interface Ten-GigabitEthernet1/0/1

default

interface Bridge-Aggregation1

link-aggregation mode dynamic

interface Ten-GigabitEthernet1/0/1

port link-aggregation group 1

interface Bridge-Aggregation1

port link-type trunk
undo port trunk permit vlan 1
port trunk permit vlan 2 to 4094

best regards

[cvanaxel]

where do you see that it not match with the agg?

config looks the same?

[aybra]

Hello

interface Bridge-Aggregation1
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 2 to 4094
 link-aggregation mode dynamic
#
interface Ten-GigabitEthernet1/0/1
 description Trunk UP RSW.1 port 11
 port link-aggregation group 1

---------

the bold commands should be also on the port Ten-GigabitEthernet1/0/1, normally when you type them on the agg the system will add them on the physical ports, for that i requested to reove the agg and recreate it in the correct order.

best regards

[cvanaxel]

I will do it now.

[cvanaxel]

still cant ping each other.

RSW.1# display port trunk
RSW.1# sh trunk
Ambiguous input: trunk
RSW.1# sh trunks

 Load Balancing Method:  L3-based (default)

  Port | Name                             Type       | Group Type
  ---- + -------------------------------- ---------- + ----- --------
  1    | UP MaNZA                         100/1000T  | Trk1  LACP
  2    | UP MaNZA                         100/1000T  | Trk1  LACP
  3    | UP MaNZA                         100/1000T  | Trk1  LACP
  4    | UP MaNZA                         100/1000T  | Trk1  LACP
  5    | UP MaNZA                         100/1000T  | Trk1  LACP
  10   | DOWN.8 kamer laptops-srfaces ... 100/1000T  | Trk5  Trunk
  11   | StorageRSW.1 DOWN                100/1000T  | Trk11 LACP
  41   | Tijdelijk naar RSW laatste sw... 100/1000T  | Trk8  Trunk
  42   | Tijdelijk naar RSW op de gron... 100/1000T  | Trk9  Trunk
  43   | Tijdelijk naar RSW.10            100/1000T  | Trk6  Trunk
  44   | Tijdelijk naar RSW.2             100/1000T  | Trk7  Trunk
  45   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  46   | DOWN RSW.2                       100/1000T  | Trk2  Trunk
  47   | wifi                             100/1000T  | Trk3  LACP
  48   | wifi                             100/1000T  | Trk3  LACP
  51   | B vleugel                        1000SX     | Trk4  Trunk
  52   | B vleugel                        1000LX     | Trk10 Trunk

RSW.1# sh lacp

                                    LACP

           LACP      Trunk     Port                LACP      Admin   Oper
   Port    Enabled   Group     Status    Partner   Status    Key     Key
   -----   -------   -------   -------   -------   -------   ------  ------
   1       Active    Trk1      Up        Yes       Success   0       54
   2       Active    Trk1      Up        Yes       Success   0       54
   3       Active    Trk1      Up        Yes       Success   0       54
   4       Active    Trk1      Up        Yes       Success   0       54
   5       Active    Trk1      Up        Yes       Success   0       54
   11      Active    Trk11     Up        Yes       Success   0       64
   47      Active    Trk3      Up        Yes       Success   0       56
   48      Active    Trk3      Up        Yes       Success   0       56

RSW.1# ping 10.161.1.199
Request timed out.

5700

interface Bridge-Aggregation1
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 2 to 4094
 link-aggregation mode dynamic
#
interface NULL0
#
interface Vlan-interface3111
 ip address 10.161.1.199 255.255.255.0
#
interface FortyGigE1/0/41
#
interface FortyGigE1/0/42
#
interface M-GigabitEthernet0/0/0
#
interface Ten-GigabitEthernet1/0/1
 port link-type trunk
 undo port trunk permit vlan 1
 port trunk permit vlan 2 to 4094
 port link-aggregation group 1

[StorageRSW.1-Bridge-Aggregation1]dis port trunk
Interface             PVID    VLAN Passing
BAGG1                 1        3111, 3114, 3116-3117, 3120-3122
XGE1/0/1              1        3111, 3114, 3116-3117, 3120-3122

[StorageRSW.1-Bridge-Aggregation1]dis link-aggregation verbose
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected,
             I -- Individual, * -- Management port
Flags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired

Aggregate Interface: Bridge-Aggregation1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
Management VLAN : None
System ID: 0x8000, d894-0390-1224
Local:
  Port             Status  Priority Oper-Key  Flag
--------------------------------------------------------------------------------
  XGE1/0/1         S       32768    1         {ACDEF}
Remote:
  Actor            Partner Priority Oper-Key  SystemID               Flag
--------------------------------------------------------------------------------
  XGE1/0/1         11      0        64        0xc40 , e007-1b2c-0c40 {ACDEF}

[StorageRSW.1-Bridge-Aggregation1]%Oct 11 09:54:31:433 2018 StorageRSW.1 LLDP/5/LLDP_PVID_INCONSISTENT: PVID mismatch discovered on Ten-GigabitEthernet1/0/1 (PVID 1), .

[cvanaxel]

The problem is still there. Is it a bug? between the aruba 2530 and the 5700?

[aybra]

Hello

now the situation is better the agg is working correctly between the aruba and the 5700.

please provide output of command disp port trunk on the Aruba, it seems there is mis-config on the pvid which should be resolved and it will work.

and also provide the last config of the two switches.

best regards

[cvanaxel]

I did at send the display port trunk

[aybra]

Hello

the one sent is without output, also i need the configurations files.

best regards

[cvanaxel]

if i do display port trunk on aruba. It is empty. Notting happens.

conf files Download