configuration of port port(T) and port (S) as both the have the same port number

[Bijukiv]

I have a query for configuration of 10/100/1000-t (T) and SFP (s) port for the switch HP 2920 48G-poe

As the both the ports have the same port number. 

TO make port 48r has management port what is the command ?

How to make port 47s and 48s as trunk ?

regards

Biju

[parnassus]

Those ports are Dual Personality ports: you can use just one of them at time...if you use a {45,46,47,48}T (copper) port then you can't use concurrently also the same {45,46,47,48}S (SFP) port and vice-versa. This is the meaning of Dual Personality (T/S), one or the other.

Once you are aware of that characteristic you can decide to configure a LAG (Link Aggregation Group) made of two member ports (as example: 47S+48S equipped with SFP Modules or 47T+48T) and use that newly created trunk - configured as static or LACP, it's up to you and your requirments - to uplink your Switch to another manageable Switch (or to a Server with NICs teamed/bonded).

[starkesh]

Hi,

I could not catch that.

How we can make them trunk?

I connect one of them to another switch. I have the light on but no ping.

Cheers