Help to explain output of command "show ip route"

[leeffa]

Hi all,

Can anyone help me to explain output of command "show ip route" in HP ProCurve.

Here is an example:

ProCurve> show ip route

IP Route Entries

IP Routing : Enabled

Default TTL : 64 

ARP Age : 20

Destination   Gateway  VLAN Type  Metric  Dist

 -----------   ----------   ---- ------   -----   ---  

10.0.0.0/16  DEFAULT_VLAN  1  connected  1  0 

127.0.0.0/8   reject static 0  0 

127.0.0.1/32   lo0  connected  1  0 

172.16.10.121/32 lo2     static  1  0 

172.16.100.0/24  10.0.8.11   1  ospf  1  1

172.16.102.0/24  VLAN2  2  connected  1  0 

Thanks.

[Fredrik Lönnman]

What do you want to know, more precisely?

The interface vlan 1 has an ip adress set somehwere in the 10.0.0.0/16 range, thus it is connected.

127/8 are loopback

There is a static route stating that the host 172.16.10.121/32 sits behind lo2 (makes little sense)

172.16.100.0/24 are learnt via ospf from neighbour 10.0.8.11

Interface vlan2 has an ip adress somewhere in 172.16.102.0/24