help with segregating network traffic

[CS-Support]

Hi, I'm new to all of this, so sorry for asking such a basic question...

I have two devices that I want to segregate via VLAN on an HP2824 switch, but I'm not sure how to do this...

The two devices are plugged into ports 17 and 18; they must communicate with 2 servers plugged into ports 19 and 20 but don't need to communicate with anything else on our network. However, the servers in ports 19 and 20 need to communicate with these two devices AND the rest of the lan.

What combination of tagged/untagged/forbid/auto will give me this configuration (I'm using the web interface, but can use the CLI if needed).

Thanks.

[Richard Litchfield]

You'll need to provide more info. Do you want to route between VLANs? Do the servers have 802.1q VLAN tag capabilities? A diag is often helpful too.