How to create VLAN and trunk [tag] fastest on procurve switch ?

[Convert Switch cisco to]

If cisco use spanning-tree extend system-id no spanning-tree vlan 1114-1130,1202-1212,1214-1230,1401-1412,1414-1430,1501 no spanning-tree vlan 1502-1512,1514-1530,1601-1612,1614-1630,1701-1707,1709 ! vlan internal allocation policy ascending ! vlan 7,15,60,77-78,80-88,90,101-105,155-226,999,1001,1006-1007,1009-1012 ! vlan 1014-1022,1024-1030,1101-1107,1109-1112,1114-1130,1202-1212,1214-1230 ! vlan 1401-1412,1414-1430,1501-1512,1514-1530,1601-1612,1614-1630,1701-1707 ! vlan 1709-1711, in procurve must use the command ? because now i must create every VLAN on procurve switch it so hard because have a lot and i must use command tag port uplink every VLAN it so hard. Please advice me for compatitive command on procurve because i must convert cisco many if it's so hard may be i not change it to procurve

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1453337

[sm-noc]

The config can be converted to txt file, or can be import, you can do this way to speed up your deployment.

for the link-aggregation per port, you can do copy, copy configuration source int <interface> destination int (interface> to int <interface>