HP 6125XLG Issue

[RogerCrawford]

I got a couple of HP 6125XLG switches for my c7000 unaware that the behavior has changed on the Interconnects on how to setup the switches. With my 6120s they did what they needed to automatically for communication between the switches. I need to enable the 6125XLGs to do the same thing so my Cluster Vailidation will work. Is this as simple as enabling the cross connect ports on 17-20 on each switch?  I don't need anything out of the ordinary here just using the 6125s to connect a couple of blades to a MSA 2050 for a Data Cluster I just need the different NICs on each switch to be able to see the other's ont he other switch for Cluster and Multi Path. Any tips would be appreciated. Thanks

[parnassus]

Have you checked this guide?

[RogerCrawford · Accepted solution]

Yes I did look this over, basically all's I had to do was enable Port 17 crossconnects on each switch and it fixed my issue. Thanks