HPE Community
HPE Aruba Networking & ProVision-based
1833053 Members
2536 Online
110049 Solutions
New Discussion

HP j2858c and J8177C transceivers not working on E6200yl switches

 
srkwithlove
New Member

‎06-04-2011 04:20 AM

‎06-04-2011 04:20 AM

HP j2858c and J8177C transceivers not working on E6200yl switches

Hi,

We have recently deployed 4 E6200yl switches in 2 projects. We have about 70 FiberSFPs (j4858C) and 5 Copper SFPs (J8177C). Only 6 fiber and 2 copper are working ok. Rest all do not power on when plugged in. We contacted our vendor and he replaced all the transceivers but no use. What could be the issue? Any help would be appreciated as we are on a tight schedule and this is delaying us severely.

0 Kudos
2 REPLIES 2
chrisuk85
Occasional Advisor

‎06-07-2011 03:47 AM

‎06-07-2011 03:47 AM

Re: HP j2858c and J8177C transceivers not working on E6200yl switches

Have you ensured the interfaces are not Administratively Down?

0 Kudos
Mik-HPN
Valued Contributor

‎06-16-2011 03:12 AM

‎06-16-2011 03:12 AM

Re: HP j2858c and J8177C transceivers not working on E6200yl switches

Interesting that the vendor replaced them all, normally all vendors refer you to HP support. Are you sure that all of the Gbics are genuine HP parts?

Are they reccognized by the switch?

What, if any, messages are in the logs?

Do the Gbics work in other HP switches and if yes, what model and what SW revision?

HPN Transceiver guru!
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.