HPE Aruba 2530 spanning-tree with vlan and port trunking or server teaming

[Shay Hanya]

Hi

I have 2 Aruba 2530, sw1 24g ports and 2nd 48g ports.

Between the switches there are 2 cables conncted in trunk mode sw24 ports 23&24 connected to sw48 on ports 47&48.

The spanning-tree is enable on  the 2 sw.

In the logs of the switch there is always messages port 47 is down or port 48 is down.

What should I do that the prots will be always up?

The are 2 servers that are connected the the 24 sw, each server with 2 nic's. There are alot of disconected messages and lost connection to the servers, the servers nic are configured as dynamic and the ports on the switch as lacp.

What I"m doing wrong?

BR

Shay

[parnassus]

It's hard to tell (and help you) without seeing sanitized switches running configurations...