HPE Switch “Software caused connection abort”

[Leonard504]

I have a stacked HPE 2920 switches which have two vlan-interfaces (VLANs 200 and 96):

vlan 96
 name "mgmt"
 untagged 1/1,2/1
 tagged 1/48,Trk1-Trk5
 ip address 192.168.96.20 255.255.255.0
 ip helper-address 10.200.200.26
 exit
vlan 200
 name "inside"
 untagged 1/2-1/36,2/2-2/36
 tagged 1/48,Trk1-Trk5
 ip address 10.200.200.150 255.255.0.0
 exit

Pings will be answered on both IP-Addresses. But the SSH Connetion only works on the VLAN 200. I get the following error message on the VLAN 96 IP-Address:

Network error: Software caused connection abort

No ACL are set on the switch.

Have someone an idea where could be the issue?

Thanks for your help in advance.

[akg7]

Hello,

Can you please share 'show ip ssh' output?

Thanks!