HPE Aruba Networking & ProVision-based
1833758 Members
2805 Online
110063 Solutions
New Discussion

J4904 (2848) Max VLAN's at 8? How do I get around this.

 
fltnlow
Occasional Visitor

J4904 (2848) Max VLAN's at 8? How do I get around this.

I just recenetly have the need to add additional VLAN's to some of older hardware (2848's) and ran into a total VLAN count issue.  Apprently max VLAN's is set to 8 but documentation shows 60 are supported.

 

Can anyone tell me how to get around this?  I have yet to find anything to point me in the right direction and need to get this resolved as quickly as possible.

 

__________________________________

 

2848-01# show vlan
 Status and Counters - VLAN Information
  Maximum VLANs to support : 8

 

__________________________________

 

VLAN support and tagging: Supports the IEEE 802.1Q (4,096 VLAN IDs) and 256 VLANs simultaneously

 

__________________________________

2 REPLIES 2
Fredrik Lönnman
Honored Contributor

Re: J4904 (2848) Max VLAN's at 8? How do I get around this.

Do you have the "max-vlans <enum>" command in configure mode?

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

fltnlow
Occasional Visitor

Re: J4904 (2848) Max VLAN's at 8? How do I get around this.

Wow, I completely missed that in the docs!

 

Quite an easy fix!

 

Thank you much.