Make dialogue (inter-vlans) several vlans without router niveau3 - Procurve 2510-24

[FOIRY]

I'm sorry in advance for my bad English I'm French

My client has several VLANs by service.

ex: vlan2, 3, 20, 40, 50,.

addressing plan is unique.

10.60.1.0/24

the management vlan is the 40 (vlan server)

How to allow communication between the vlans without router level 3?

There are 6 Switch 2510-24.

As vlan management I have an ip address: example for the first switch: 10.60.1.245/24

SwitchB 10.60.1.242

SwitchC 10.60.1.243

etc...

My DHCP server in the vlan 40 does not communicate with the other Vlans.

Help me please

Info:

Switches are link aggrega

example: > trunk 23-24 trk1 lacp

all vlans are "tagged" in the trunk trk1

in each vlans, I have no problem of communication.

In advance thank you

P.S. This thread has been moved from Comware-Based to ProCurve / ProVision-Based. - Hp Forum Moderator

[FOIRY]

; J9279A Configuration Editor; Created on release #Y.11.12

hostname "SWITCH-E" 
max-vlans 14 
interface 1 
   name "Srv-01" 
exit
interface 2 
   name "Srv-01" 
exit
interface 3 
   name "SRV-02" 
exit
interface 4 
   name "SRV-02" 
exit
interface 5 
   name "srv-03" 
exit
interface 6 
   name "srv-04" 
exit
interface 7 
   name "srv-05" 
exit
interface 8 
   name "pass-253" 
exit
interface 11 
   name "CNX-SwitchA" 
exit
interface 15 
   name "Trunk-vers-P25-Switch-D" 
exit
interface 16 
   name "Trunk-vers-P26-Switch-D" 
exit
interface 17 
   name "Trunk-vers-P25-Switch-C" 
exit
interface 18 
   name "Trunk-vers-P26-Switch-C" 
exit
interface 19 
   name "Trunk-vers-P25-Switch-B" 
exit
interface 20 
   name "Trunk-vers-P26-Switch-B" 
exit
interface 21 
   name "Trunk-vers-Switch-G-FO" 
exit
interface 22 
   name "Trunk-vers-Switch-G-FO" 
exit
trunk 21-22 Trk1 LACP 
trunk 19-20 Trk2 LACP 
trunk 17-18 Trk3 LACP 
trunk 15-16 Trk4 LACP 
trunk 1-2 Trk5 Trunk 
trunk 3-4 Trk6 LACP 
ip default-gateway 10.60.1.254 
snmp-server community "public" Unrestricted 
 vlan 1 
   name "DEFAULT_VLAN" 
   untagged 13,Trk1-Trk4 
   no ip address 
   tagged Trk5-Trk6 
   no untagged 5-12,14,23-24 
   exit 
vlan 2 
   name "anonymous01" 
   untagged 12 
   no ip address 
   tagged Trk1-Trk6 
   exit 
vlan 5 
   name "anonymous02" 
   tagged Trk1-Trk6 
   exit 
vlan 6 
   name "anonymous03" 
   tagged Trk1-Trk6 
   exit 
vlan 10 
   name "anonymous04" 
   tagged Trk1-Trk6 
   exit 
vlan 16 
   name "anonymous05" 
   tagged Trk1-Trk6 
   exit 
vlan 20 
   name "anonymous06" 
   tagged Trk1-Trk6 
   exit 
vlan 24 
   name "anonymous07" 
   tagged Trk1-Trk6 
   exit 
vlan 30 
   name "anonymous08" 
   tagged Trk1-Trk6 
   exit 
vlan 40 
   name "SERVEURS" 
   untagged 5-11,14,23-24,Trk5-Trk6 
   ip address 10.60.1.245 255.255.255.0 
   tagged 12,Trk1-Trk4 
   exit 
vlan 50 
   name "INTERNET" 
   tagged Trk1-Trk6 
   exit 
vlan 21 
   name "anonymous09" 
   tagged Trk1-Trk6 
   exit 
management-vlan 40 
spanning-tree
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4
spanning-tree Trk4 priority 4
spanning-tree Trk5 priority 4
spanning-tree Trk6 priority 4
spanning-tree legacy-path-cost
spanning-tree force-version RSTP-operation
password manager
password operator

1-22 Trk1 LAÍîÐ

[atqquebec]

Salut,

Tu n'est pas nécessairement dans la bonne section.  Les 2510 sont dans la série E, mais bon, je vais essayer de t'aider et je traduirai après. 

Une seule chose m'empêche de comprendre: pourquoi plusieurs vlans si le sous-réseau est le même?  Habituellement les vlan sont utilisés justement pour séparer une switch afin qu'elle puisse isoler plusieurs sous-réseau.

Merci,

[atqquebec]

Why many vlans if only one subnet?