Need Help regarding DHCP Helper

[RZY]

Hello

i got chance to work with HP but here some problem, i am trying to configure DHCP IP helper,

we are using near 10VLANS and DHCP server MS Server 2008 and scope added problem is i made 3VLANS on remote switch 2610 and assisgn IP to VLAN10 from same pool of DHCP server i untagged 2 ports on VLAN10 and remaining on other VLAN but its only pick IP from VLAN10 but when i put on other vlan ports its took 169.x.x.x any suggestion please.

Here is running config

KAFD-B1-Core(config)# show running-config

Running configuration:

; J8697A Configuration Editor; Created on release #K.15.02.0005

hostname "KAFD-B1-Core"
module 1 type J9537A
module 2 type J9537A
trunk A1-A8 Trk1 Trunk
trunk A9-A16 Trk2 Trunk
trunk A17-A24 Trk3 Trunk
trunk B1-B8 Trk4 Trunk
trunk B9-B16 Trk5 Trunk
trunk B17-B24 Trk6 Trunk
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged Trk1-Trk6
ip address dhcp-bootp
exit
vlan 10
name "MANAGEMENT"
ip helper-address 10.10.10.30
ip address 10.10.10.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 2
name "INTRCOM"
ip helper-address 10.10.10.30
ip address 10.10.2.1 255.255.254.0
tagged Trk1-Trk6
exit
vlan 4
name "CCTV"
ip helper-address 10.10.10.30
ip address 10.10.4.1 255.255.254.0
tagged Trk1-Trk6
exit
vlan 13
name "PAS"
ip helper-address 10.10.10.30
ip address 10.10.13.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 14
name "DSAS"
ip helper-address 10.10.10.30
ip address 10.10.14.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 15
name "BMS"
ip helper-address 10.10.10.30
ip address 10.10.15.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 16
name "ACS"
ip helper-address 10.10.10.30
ip address 10.10.16.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 20
name "MANAGEMENT-R"
ip helper-address 10.10.10.30
ip address 10.10.20.1 255.255.255.0
tagged Trk1-Trk6
exit
vlan 6
name "INTCOM-R"
ip helper-address 10.10.10.30
ip address 10.10.6.1 255.255.254.0
tagged Trk1-Trk6
exit
vlan 8
name "CCTV-R"
ip helper-address 10.10.10.30
ip address 10.10.8.1 255.255.254.0
tagged Trk1-Trk6
exit
snmp-server community "public" unrestricted
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4
spanning-tree Trk4 priority 4
spanning-tree Trk5 priority 4
spanning-tree Trk6 priority 4
no autorun
no dhcp config-file-update
no dhcp image-file-update
password manager
password operator

KAFD-B1-Core(config)#

[Vince_Whirlwind]

If your DHCP server is 10.10.10.30, then that looks good.

What are your scope options for, say, your 10.10.2.0 subnet?