HPE Community
HPE Aruba Networking & ProVision-based
1833704 Members
3311 Online
110062 Solutions
New Discussion

Port-access and Radius Authentication

 
JamelB
Occasional Contributor

‎10-13-2016 07:16 AM - edited ‎10-16-2016 11:06 AM

‎10-13-2016 07:16 AM - edited ‎10-16-2016 11:06 AM

Port-access and Radius Authentication

Hello,

I have configured port-access with radius authentication on a HP PC 2524, and configured a Radius server using Windows 2012 R2.

The authentication is stuck on "connecting" status on the switch when I plug a computer to the port where I have configured the aaa authentication. There is no log on HP or Radius side. I'm stuck since a week and maybe your advices can be helpful :)

Attached some screenshot of the configuration.
There is no firewall between the radius server and the switch.

Thank you if you can help

Jamel

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.