HPE Community
HPE Aruba Networking & ProVision-based
1830767 Members
2256 Online
110015 Solutions
New Discussion

procurve 3500yl 24G (j8692a) link-flap detected

 
VedranVTV
New Member

‎07-07-2011 03:08 AM - last edited on ‎05-18-2015 06:36 PM by

‎07-07-2011 03:08 AM - last edited on ‎05-18-2015 06:36 PM by

procurve 3500yl 24G (j8692a) link-flap detected

Hi,

I have some problems with my switch. Sometimes my Ethernet reconnects, and I receive massage (HP GUI Alert logs) "Link-flap detected on port xy".  I work in television, so You can imagine what happened when I tray copy the file, and on half way Ethernet disconnect.

 

Version: K.15.03.0007,ROMK.15.11

 

please help

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Moderator

0 Kudos
1 REPLY 1
EricAtHP
Esteemed Contributor

‎05-22-2015 10:18 AM

‎05-22-2015 10:18 AM

Re: procurve 3500yl 24G (j8692a) link-flap detected

You are running really really really old software. This message is simply that a port is going up and down too frequently. This can be due to a device that has a bad driver or a bad cable, etc.

 

I would recommend updating software. But please read the release notes as you will have to do it in multiple steps.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.