HPE Community
HPE Aruba Networking & ProVision-based
1832300 Members
2094 Online
110041 Solutions
New Discussion

Re: PXE boot on 5412xl

 
dyardley
Occasional Contributor

‎03-27-2014 08:07 AM

‎03-27-2014 08:07 AM

PXE boot on 5412xl

I have a bunch of lenovo twists that I am trying to image using WDS, the problem is if I try to pxe boot off of a port that is connected to my 5412 I will not autonegate at 1000 and I will have to set the port to use 100fd. Now on the hp 2920 that are in the IDF closets I dont have that issue. Any ideas on why that happens only on the 5412? 

0 Kudos
1 REPLY 1
Richard Litchfield
Respected Contributor

‎04-02-2014 01:41 AM

‎04-02-2014 01:41 AM

Re: PXE boot on 5412xl

Maybe the time it takes spanning tree to work out what is connected defeats the auto-negotiation.

Try this:
spanning-tree B14 admin-edge-port
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.